Thingiverse
AM8 - Z and Y endstop holders with tighter holes by ikarisan
by Thingiverse
Last crawled date: 3 years, 1 month ago
Modified endstop holders for AM8
These parts are the same as provided by pheneeny, but the diameter of the mounting holes for the micro switches has been decreased.
The Z switch holder
My Anet A8 uses 2x16 "wood screws" to fix the Z-switch. But the original design uses a diameter of 2.50mm for the mounting holes. So my 2mm screw felt through. :( The new diameter for the switch holes ist 1.50mm.
The Y rod holder
The original Y rod holder uses 1.75mm diameters for the switch holes. Due to printing tolerances my 2mm screws are somewhat loose. The new diameter for the switch holes is 1.50mm.
These parts are the same as provided by pheneeny, but the diameter of the mounting holes for the micro switches has been decreased.
The Z switch holder
My Anet A8 uses 2x16 "wood screws" to fix the Z-switch. But the original design uses a diameter of 2.50mm for the mounting holes. So my 2mm screw felt through. :( The new diameter for the switch holes ist 1.50mm.
The Y rod holder
The original Y rod holder uses 1.75mm diameters for the switch holes. Due to printing tolerances my 2mm screws are somewhat loose. The new diameter for the switch holes is 1.50mm.
Similar models
thingiverse
free
AM8 Specular Z Endstop by -esa-
...osition to make it like the stock z endstop mount which comes with the original anet a8.(i also tightened the screw holes a bit)
thingiverse
free
Y endstop switch holder by mat100
...y endstop switch holder by mat100
thingiverse
endstop switch holder for mounting on the travel rod 8mm
thingiverse
free
Am8 Y rod 10mm with anet for original y endstop by jonnycrack
...with anet for original y endstop by jonnycrack
thingiverse
y rod support for 10mm y bar for am8 with original endstop of anet a8
thingiverse
free
AM8 - Makerbot Endstop - Y -Axis by buliwyf42
...
so i came up with an endstop which is mounted to the back of the frame.
p.s. the picture of the mounted one is an older revision
thingiverse
free
Low Profile Y Endstop by PrusaPal
...stop by prusapal
thingiverse
y-axis endstop for microswitch with 10mm hole spacing
8 mm guide rod.
m2.5 switch mounting screws.
thingiverse
free
Y Holder by matiasingrassia
...trusions. it is designed for be mounted on steel rod of 8mm diameter.
i give you the original 3d file modeled in solidworks 2018.
grabcad
free
Prusa Y Holder
...rusions. it is designed for be mounted on steel rod of 8mm diameter.
i give you the original 3d file modeled in solidworks 2018.
thingiverse
free
Z Axis Adjustable Endstop - Folgertech Prusa i3 by igel
... smooth rod so i didn't need to use the tightening screw. if you need the tightening screw, drill a new hole for the endstop.
thingiverse
free
AM8 Y Carriage Kit For Ender3 Bed
...ttom side. there's just no room for it with this type of frame.
it includes a mount to fit my narrow y axis chain
thank you!
thingiverse
free
AM8 RAMPS Y axis endtop mount and target by PapaJohn88
...h
2 x m5 x 10mm screws
2 x m5 square nuts
printer:
anet a8
rafts:
no
supports:
no
resolution:
0.2 (i printed at .12)
infill:
20%
Ikarisan
thingiverse
free
50mm Z axis calibration by ikarisan
...x10x50mm "tower" to calibrate the steps for the z axis.
please let this object cool down before you measure its hight!
thingiverse
free
Sortimentsbox Einsätze by ikarisan
...euse-ultramarinblau-800062001.html
print them in "vase mode" with 0% infill, 2 bottom layers, 1 shell and no top layer.
thingiverse
free
IKEA STUVA filament guide by ikarisan
....
i have uploaded a new version with an inner diameter of 4.02mm. in theory, a ptfe tube (4mm diameter) fits into the new guide.
thingiverse
free
B2D extruder mount for 2020 extrusions by ikarisan
...y 180° and mount the extruder on "the back".
i printed my mount with 30% infill, 4 shells and 4 top and bottom layers.
thingiverse
free
150mm calibration cross by ikarisan
...asure the axis. but put the cross on the table, because the axis are very thin and flexible (to save filament and printing time).
thingiverse
free
Precision Piezo Orion - 1/8" groove top by ikarisan
...oo small for your need.
please print the hole test object first. it makes use of the same thread diameter as the groove top file.
thingiverse
free
HEVO Precision Piezo Orion Extruder Mount - Remix by ikarisan
...ounting points.
four from the front (4x m3 screw) and one from behind (1x m3 screw).
there is no need of this silly brass insets!
thingiverse
free
MKS Gen 1.4 mount with cable protection (for 2020, 2040 extrusions) by ikarisan
...well.
! update: 2018-05-10 !
the new version has two new holes, each of which can accommodate an m3 nut to hold my air tunnel. :)
thingiverse
free
ANET A8 Rear Bed Level Sensor Holder - Modified by ikarisan
... x 12mm screws
update:
for version "m18 sensor holder v2.1.stl" i have added a nip to pick up the nut of the sensor. :)
Am8
evermotion
$12
armchair 055 am8
...f armchair with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$12
armchair 051 am8
...f armchair with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
chair 012 am8
...l of chair with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
chair 011 am8
...l of chair with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
chair 017 am8
...l of chair with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
desk 079 am8
...el of desk with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
chair 027 am8
...l of chair with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
chair 015 am8
...l of chair with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
chair 037 am8
...l of chair with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
chair 013 am8
...l of chair with all textures, shaders and materials. it is ready to use, just put it into your scene.. evermotion 3d models shop.
Tighter
3ddd
$1
Spoleto Chair - Knoll
...side chair in a more compact envelope, appropriate for tighter ...
3d_export
$5
nail protector
...beneath surface, it could help to keep your finger tighter<br>your nails have enough space to work on it, and...
thingiverse
free
belt tighter by crota
...belt tighter by crota
thingiverse
belt tighter
thingiverse
free
tighter y belt holder
...tighter y belt holder
thingiverse
i made it tight
thingiverse
free
SMA Connector Tighter by ZayarN
...sma connector tighter by zayarn
thingiverse
hand tight for sma connector.
thingiverse
free
Tighter clamp by Korri
...orri
thingiverse
i made this open version of the clamp, so that you can adjust the strength of the grip by tightening the screw.
thingiverse
free
Doubledealer leg extension (tighter lock) by Instantbees
...th a slightly tighter locking point for robot mode knees.
original design by megamoonmanhttps://www.thingiverse.com/thing:4764021
thingiverse
free
Duplo Train for Wood Tracks Tighter by mistyCardinal
...e sizes of the pegs a smidge, so the blocks have a tighter fit, and adds a rim on the inside of the wheel to tighten up that fit.
thingiverse
free
cart for ATOM with belt tighter by crota
...cart for atom with belt tighter by crota
thingiverse
for atom 3d printerhttp://atom3dp.com/http://www.simplyalt.com/atom/
thingiverse
free
band to hold the two sides tighter by mohamedhani10
...ose due to excessive use so this is sort of a band that looks better than a rubber band to hold everything a bit tighter in place
Endstop
thingiverse
free
Endstop-holder for endstop v1.2 by albiuz
...endstop-holder for endstop v1.2 by albiuz
thingiverse
endstop-holder designed for mech endstop v1.2
thingiverse
free
Endstop by 3dboxpro
...endstop by 3dboxpro
thingiverse
endstop
thingiverse
free
Endstop by 1sPiRe
...endstop by 1spire
thingiverse
endstop model for conceptions
thingiverse
free
Endstop holder for Opto or Mechanical endstops by LulzBot
... endstops by lulzbot
thingiverse
these are the standard 1.0 prusa endstops with an added mounting hole for mechanical endstops.
thingiverse
free
Endstop Holder by onurhamdiuzun
...endstop holder by onurhamdiuzun
thingiverse
endstop holder for makerbot endstop and other endstops
thingiverse
free
Endstop Cover
...endstop cover
thingiverse
cover for endstop boards for makerbot design.
thingiverse
free
Endstop Mount for optical Endstops by Whitehawk2000
...whitehawk2000
thingiverse
use two 20mm m3 screws and nuts to screw the endstop onto the mount and just clip it onto the 8mm rod.
thingiverse
free
C-beam endstop mount for Makerbot type endstops
...c-beam endstop mount for makerbot type endstops
thingiverse
c-beam endstop mount for makerbot type endstop boards.
thingiverse
free
Endstop Mount for MakerBot Mecanical Endstop. by nka
...v-slots carriage.
endstop is screw with m3 (8mm) tapped hole and the endstop hold on the extrusion using a m5 (8mm) and t-nuts.
thingiverse
free
ENDSTOP 10mm by desert500
...endstop 10mm by desert500
thingiverse
endstop
Z
3d_export
$5
nissan z
...nissan z
3dexport
nissan z
3ddd
$1
Vase Z
...vase z
3ddd
vase z
3ddd
$1
полотенцесушить Z
...полотенцесушить z
3ddd
полотенцесушитель
полотенцесушить z
design_connected
free
Z-Chair
...z-chair
designconnected
free 3d model of z-chair designed by karman, aleksei.
design_connected
$11
Z Lamp
...z lamp
designconnected
phillips z lamp computer generated 3d model. designed by kalff, louis.
3d_export
$5
Dragon balls z
...dragon balls z
3dexport
dragon ball z
turbosquid
$20
Fighter Z
...
turbosquid
royalty free 3d model fighter z for download as on turbosquid: 3d models for games, architecture, videos. (1292563)
turbosquid
$9
Pen Z
...pen z
turbosquid
free 3d model pen z for download as obj on turbosquid: 3d models for games, architecture, videos. (1686775)
turbosquid
free
z chair
...z chair
turbosquid
free 3d model z chair for download as max on turbosquid: 3d models for games, architecture, videos. (1410230)
turbosquid
$5
Letter Z
...urbosquid
royalty free 3d model letter z for download as max on turbosquid: 3d models for games, architecture, videos. (1408540)
Y
turbosquid
$1
Tetera y Galletas y Caf
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Смеситель Y-CON
...смеситель y-con
3ddd
смеситель , y-con
смеситель y-con
3ddd
$1
Y-Chair
...y-chair
3ddd
tom dixon
y-chair designed by tom dixon,
3ds max + obj, corona
3ddd
$1
Y Chair compilation
....net/products/us/y-chair-sled-base
y chair swivel basehttp://www.tomdixon.net/products/us/y-chair-swivel-base
turbosquid
$190
Y-8
...y-8
turbosquid
royalty free 3d model y-8 for download as max on turbosquid: 3d models for games, architecture, videos. (1658891)
turbosquid
$7
Bench Y
...turbosquid
royalty free 3d model bench y for download as obj on turbosquid: 3d models for games, architecture, videos. (1488746)
turbosquid
$15
bonePile Y
...oyalty free 3d model bonepile y for download as blend and obj on turbosquid: 3d models for games, architecture, videos. (1546374)
turbosquid
$7
Y for Yarn
...d
royalty free 3d model y for yarn model for download as max on turbosquid: 3d models for games, architecture, videos. (1699732)
turbosquid
$2
FONT Y
...quid
royalty free 3d model font y for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1549457)
3ddd
$1
WOOD-y
...wood-y
3ddd
wooden guy
Holes
design_connected
$9
Hole
...hole
designconnected
zeritalia hole shelves and storage computer generated 3d model. designed by derin design.
3ddd
$1
Magic hole
...magic hole
3ddd
magic
дизайнерское кресло magic hole
3d_export
free
black hole
...black hole
3dexport
3d rendering black hole in blender 2.9
3ddd
$1
Magic Hole
...magic hole
3ddd
philippe starck
magic hole - дизайн philippe starck (2010)
turbosquid
$4
Black Hole
...squid
royalty free 3d model black hole for download as blend on turbosquid: 3d models for games, architecture, videos. (1606724)
turbosquid
$5
security hole
...yalty free 3d model security hole for download as 3dm and max on turbosquid: 3d models for games, architecture, videos. (1669645)
turbosquid
$32
hole punch
... 3d model hole punch for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1230702)
3d_export
$10
Black hole
...black hole
3dexport
a minimalist representation of a singularity
turbosquid
$50
Worm Hole
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
15 Hole
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Holders
archibase_planet
free
Holder
...holder
archibase planet
holder toilet paper holder
holder paper n070712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...e planet
holder rack toilet paper holder
holder toilet roll n240715 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pen holder support prop
pen holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pole post holder
сhurch cross pole holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder bathroom ware
shower holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...oilet paper holder
holder paper devon&devon; time black n241113 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder towel rack towel-horse
holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...lder
archibase planet
holder hanger hanger for towel
holder towel n250912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.