Thingiverse
96Boards 410c DragonBoard Case by ljking
by Thingiverse
Last crawled date: 3 years, 1 month ago
This project is designed to fit the 410c DragonBoard from 96Boards. There are two variants of the box, the 'box' version places the screws that hold the box together outside the 410c, this is good for creating a large enough box to balance the 5" Waveshare display on.
The 'micro' box holds the 410c and nothing else, this is useful for building a pocket size system.
The 'box' can be extended vertically to hold a 2x16 LCD display, or a 5" HDMI display can be added in a seperate box. The seperate 5" LCD box can be mated to the 410c box with hinges or can be a standalone item only linked with the cables.
A 75x75mm VESA mount can be added to the micro-box to allow easy mounting onto a VESA monitor.
The 'micro' box holds the 410c and nothing else, this is useful for building a pocket size system.
The 'box' can be extended vertically to hold a 2x16 LCD display, or a 5" HDMI display can be added in a seperate box. The seperate 5" LCD box can be mated to the 410c box with hinges or can be a standalone item only linked with the cables.
A 75x75mm VESA mount can be added to the micro-box to allow easy mounting onto a VESA monitor.
Similar models
thingiverse
free
DragonBoard 410c case by AlexGale
...dragonboard 410c case by alexgale
thingiverse
this is a case that holds a qualcomm dragonboard 410c
thingiverse
free
96Boards CE Board and LCD Mount by forcedinductionz
...ductionz
thingiverse
an lcd / board mount for 96board ce boards.
works with this lcd http://www.waveshare.com/5inch-hdmi-lcd.htm
thingiverse
free
Dragonboard 410c Case by giantpune
...that the bottom of the case holds the nuts without dropping them, and the top of the case holds the screws without dropping them.
thingiverse
free
LCD Project Box with Header Breakout for 1.8" TFT LCD Display module ST7735S 128x160 by cncartist
...ed if needed. this lcd box fits into my arduino project box (http://www.thingiverse.com/thing:1520159) for a clean display unit.
thingiverse
free
VESA 100 to 75 mount adapter by Irah
... you can mount a display that has a 100mm vesa-standard connection on the back to a display holding arm that has 75mm connection.
thingiverse
free
100mm to 50mm Vesa Adapter by CampfireMike
... x 100mm pattern mount. the offset is so that you can get a wrench in behind the display to tighten the 100mm vesa mount screws.
thingiverse
free
75MM to 50MM VESA Mount Adapter by electronlove
...rew pattern. i'm using to mount a waveshare display to an arm (see https://www.thingiverse.com/thing:2799628)
it just works!
thingiverse
free
Ender Hanging LCD Display Mount by tonyguar
... added a micro sd reader port, two mounting brackets with screw in pins, and a locking arm to hold the display out when using it.
thingiverse
free
LCD Display mount, right side remix by devonjones
...e right side of the prusa i3.
needs the other two parts from "lcd display mount for reprap discount full lcd display"
thingiverse
free
96Boards CE Hot Shoe Camera Mount by forcedinductionz
...96boards ce hot shoe camera mount by forcedinductionz
thingiverse
a 'hot shoe' mount for 96board ce boards.
Dragonboard
thingiverse
free
DragonBoard 410c case by AlexGale
...dragonboard 410c case by alexgale
thingiverse
this is a case that holds a qualcomm dragonboard 410c
thingiverse
free
Dragonboard 410c Case by giantpune
...that the bottom of the case holds the nuts without dropping them, and the top of the case holds the screws without dropping them.
thingiverse
free
Dragonboard 410c Case by zeroepoch
...ery slightly to reduce covering the connectors. the connector overlap could have just been my printer doing that, but who knows.
thingiverse
free
Dragonboard IFC6410 Case with 80mm Fan Attachment by alexgian
.... i've yet to tests the bottom part of the case, but the top part works perfect with a thermaltake 80mm usb fan from amazon.
96Boards
thingiverse
free
96Boards CE Hot Shoe Camera Mount by forcedinductionz
...96boards ce hot shoe camera mount by forcedinductionz
thingiverse
a 'hot shoe' mount for 96board ce boards.
thingiverse
free
96Boards CE Board and LCD Mount by forcedinductionz
...ductionz
thingiverse
an lcd / board mount for 96board ce boards.
works with this lcd http://www.waveshare.com/5inch-hdmi-lcd.htm
thingiverse
free
96Boards (Dragon Board) case by TundraMan
...le board computer. the board snaps into the bottom part of the case and the lid is snap fitted to the bottom, no screws required.
thingiverse
free
96Boards Consumer Edition HiKey case by Jyx
...ey 620. unfortunately that is positioned at other places on the pcb on other ce devices. so, that is only good for the hikey 620.
grabcad
free
rock960
...rock960 grabcad 96boards ce based on...
410C
thingiverse
free
DragonBoard 410c case by AlexGale
...dragonboard 410c case by alexgale
thingiverse
this is a case that holds a qualcomm dragonboard 410c
thingiverse
free
Dragonboard 410c Case by giantpune
...that the bottom of the case holds the nuts without dropping them, and the top of the case holds the screws without dropping them.
thingiverse
free
Dragonboard 410c Case by zeroepoch
...ery slightly to reduce covering the connectors. the connector overlap could have just been my printer doing that, but who knows.
thingiverse
free
Servo holder for 41 mm standard servo by mojo_replica
...rc truggy project. originally made for the modelcraft standard-servo bms-410c ...
thingiverse
free
Autonomous-Webserved-Tanktrack-Robot by donboy
...bms-410c. you can buy this in europe at conrad (https://www.conrad.de/de/modelcraft-standard-servo-bms-410canalog-servo-getriebe-material-kunststoff-stecksystem-jr-404753.html). the servo is therefore interesting, because he has a...
grabcad
free
Dragon Board 410c
... accurate, due to the lack of info in the manual but it should be close enough for most jobs, and the mounting holes are correct.
3dwarehouse
free
Marshall JVM 410C
...
3dwarehouse
100w 4-channel guitar combo #410c #amp #amplifier #combo #electronic #equipment #guitar #jvm #marshall #music #tube
3dwarehouse
free
Marshall JVM Series
...205h and 410h. please rate :) #205c #205h #215c #410c #410h #amp #amplifier #cabinet #electronic #guitar #jvm #marshall #music...
Case
3d_export
$1
case
...case
3dexport
case
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case + cakes - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case for chips - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case shelving drawer
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case rack locker
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case drawer kitchen furniture
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case cupboard shelving
glass case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case handbag suitcase
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case suitcase
case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
locker case dresser
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.