Thingiverse
3.5" HDD trayless hotswap bay by numanair
by Thingiverse
Last crawled date: 3 years, 1 month ago
THIS IS AN UNTESTED PROTOTYPE: Inspect fit clearances before printing.
This is a 3D printed harddrive bay for standard 3.5in harddrives. It uses bare drives without the need for trays/rails. The door actuates a lever arm to unseat the drive for removal. It fits in a CD drive bay and mounts the same way. SATA hotswap capability requires a motherboard with AHCI.
Required hardware (lengths are not strict. Check files for exact hole lengths):
7 M2x15
2 M2x10~12
1 M3x35
CD drive mounting screws (M3)
Future plans:
If I can get dimensions for a cheap SATA 22-pin cable (like this one ebay.com/itm/Male-to-Female-7-15-Pin-Serial-ATA-SATA-Data-power-combo-extension-Cable-FO-/291369269696) I would integrate it into the rear plate. This would make the connectors slide together more reliably and with less tweaking of the dimensions.
This is a 3D printed harddrive bay for standard 3.5in harddrives. It uses bare drives without the need for trays/rails. The door actuates a lever arm to unseat the drive for removal. It fits in a CD drive bay and mounts the same way. SATA hotswap capability requires a motherboard with AHCI.
Required hardware (lengths are not strict. Check files for exact hole lengths):
7 M2x15
2 M2x10~12
1 M3x35
CD drive mounting screws (M3)
Future plans:
If I can get dimensions for a cheap SATA 22-pin cable (like this one ebay.com/itm/Male-to-Female-7-15-Pin-Serial-ATA-SATA-Data-power-combo-extension-Cable-FO-/291369269696) I would integrate it into the rear plate. This would make the connectors slide together more reliably and with less tweaking of the dimensions.
Similar models
3dwarehouse
free
Vantec Dual Bay 2.5' SATA hotswap drive bay
...vantec dual bay 2.5' sata hotswap drive bay
3dwarehouse
just a very quick model time: 30min #25 #35 #hdd #hotswap #pc #ssd
3dwarehouse
free
Hotswap HDD 2.5' & 3.5' drive bay ICY BOX
... pin molex 2 x sata 3gb/s 1 x 40mm fan $48 aud #25 #35 #525 #bay #hdd #hotswap #hotswap_drive #icy_box #pc #sata #trayless_module
thingiverse
free
Case HardDrive 2,5 by BVD
...d (cost about 7€ )
that works perfect
so i designed a case in fusion 360 for that drive
the fusion 360 files are in the downloads
thingiverse
free
cd bay 7" tablet mount by john2364
... in my saturn vue. it fits snugly in the cd bay with out tripping the cd censor. my guess is that it will fit in most cd players.
thingiverse
free
CD DRIVE STORAGE by arifsethi
... sata cables screws etc.. or chocolate bars ;) ( gamers emergency stash for power up)
when you guys print please do share.
thanks
thingiverse
free
Raspberry Pi 3 Drive Bay Mount/Case by brandonforty2
... it follows the cd drive standards so it should fit in any computer case with drive bays. the only tested case is an antec 900.
thingiverse
free
2.5 inch drive hotswap bracket
...ingiverse
designed this bracket to fit a 2.5inch ssd into my hotswap bay of my computer.
hopefully its usefull for somebody else
thingiverse
free
7mm 2.5" SATA Adaptor by encorespod
...on with the bottom mounting holes you would normally find on a 3.5" drive. (my particular drive mount only uses side rails.)
thingiverse
free
case for laptop cd-drive by EverydayEngineering
...-4117-94a2-0dfd1a2e89cd-28&algo_pvid=3a460bea-5380-4117-94a2-0dfd1a2e89cd&transabtest=ae803_1https://youtu.be/ikkbebnfha4
thingiverse
free
Easy and cheap internal Sata docking station with USB - PC 5,25 to 3,5 Sata slot by ceciox
...sert hdd (keep stable on the bottom)
2 plug your cable
3 infill with hot glue
4 enjoy
https://www.youtube.com/watch?v=hqln7pvwk9y
Trayless
thingiverse
free
3.5 inch front panel SSD hotswap pull-out trayless adaptor by Dimbit
...till trying to think of an elegant way to make an eject mechanism, but for now i'm making do with a piece of tape to pull on.
thingiverse
free
2.5" 3.5" HDD adapter V2 by LaurentWeb
...an adapter to put a 2.5" hdd in a trayless mobile rack. the same as version 1 but identified...
thingiverse
free
2.5" 3.5" HDD adapter by LaurentWeb
...an adapter to put a 2.5" hdd in a trayless mobile rack. print, put 2 screws, and enjoy our...
thingiverse
free
NanoDrives Time Machine by Zurkeyon
...features: 4-bay stack-able lcd status display hot swap design trayless system (no drive hardware, just slide drives in/out!) optical...
3dwarehouse
free
Hotswap HDD 2.5' & 3.5' drive bay ICY BOX
...#35 #525 #bay #hdd #hotswap #hotswap_drive #icy_box #pc #sata #traylessmodule ...
Numanair
thingiverse
free
Mini Desktop Hygrometer by numanair
...mini desktop hygrometer by numanair
thingiverse
mini hygrometer stand for digital chinese hygrometers commonly found online.
thingiverse
free
MP Select Mini tool hook small by numanair
...t mini tool hook small by numanair
thingiverse
smaller hook for the mpsm tool holder rack for hanging the included scraper tool.
thingiverse
free
MP Select Mini tool holder bracket rounded by numanair
...ket rounded by numanair
thingiverse
a rounded version of the mpsm tool holder bracket to better fit with the look of the printer
thingiverse
free
MP Select Mini extruder clamp with slider for tool bracket by numanair
...h slider for tool bracket by numanair
thingiverse
i remade the extruder clamp so that it can be slid onto the tool bracket/rail.
thingiverse
free
M39 Leica Thread Mount to Micro Four Thirds lens adapter by numanair
...nt to micro four thirds lens adapter by numanair
thingiverse
enables the use of m39 ltm/leica screw mount lenses on mft cameras.
thingiverse
free
Lamp Mounting Block for H/F clamp by numanair
.... this is remixed to allow a 2" harbor freight clamp to fit.
rotate the stl before slicing so that it lays flat on the base.
thingiverse
free
30mm Minimal Fan Guard: MP Select Mini by numanair
... 30mm fan on the monoprice select mini roughly based on the printer's design language while still allowing maximum airflow.
thingiverse
free
Movable Mass Balancing Toy by numanair
...g-3d-models-with-movable-masses/
update: i uploaded the wrong stl version initially. that has been corrected. as of oct. 10 2016.
thingiverse
free
Cantilever Brake Boss Cover / Plug Bolt (Through-hole Hex) by numanair
...nt much better. there should be less chance of getting it stuck this way. use grease and tighten only enough to keep it in place.
Hotswap
thingiverse
free
Dactyl Manuform Hotswap
...dactyl manuform hotswap
thingiverse
https://github.com/ibnuda/dactyl-keyboard/tree/hotswap
thingiverse
free
Hotswap Mini Forty
...hotswap mini forty
thingiverse
github.com/ibnuda/dactyl-manuform-mini-keyboard/tree/rob
thingiverse
free
2.5 inch drive hotswap bracket
...ingiverse
designed this bracket to fit a 2.5inch ssd into my hotswap bay of my computer.
hopefully its usefull for somebody else
thingiverse
free
experymentalny hotswap extruder anet by dioxik
...experymentalny hotswap extruder anet by dioxik
thingiverse
:)
thingiverse
free
SSD Tray compatible with Hotswap Tray (NAS) by KevinGregull
...vingregull
thingiverse
ssd tray that can be used to mount an ssd into a hdd sliding tray within a nas or other hotswapable tray.
thingiverse
free
Frankenstein shuttle titan full motor hotswap mount by kelanel
...hotswap mount and stretched it out in tinkercad to support a full size motor along with spacing to plug the wire in from the top.
thingiverse
free
Hotswap fan adapter - 80mm to 120mm by unf0rg0tt3n
...nd which are way more quiet than the 120mm fans included with the case
for slicing upscale to 1000% something with the dimensions
thingiverse
free
Supermicro 2.5" to 3.5" hotswap adapter by consp
... the hotswap tray).
i added witness holes for easier mounting of the side screws. bridge should be fairly easy to print on 0.2mm.
thingiverse
free
SSD Adapter for Dell 3,5" hotswap bay
...ows for placing a 2,5" ssd into a 3,5" hotplug disk carrier of a dell r415 server (and various compatible server types)
thingiverse
free
HAF-BP3SATA-Hotswap by 3Rotor
...-storage-kit/
no modification to any of the hardware required. just bolt it up and it's ready to go.
pla is perfect for this.
Hdd
turbosquid
$20
HDD
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
HDD Rack
...urbosquid
royalty free 3d model hdd rack for download as skp on turbosquid: 3d models for games, architecture, videos. (1289401)
turbosquid
$1
External HDD
...squid
royalty free 3d model external hdd for download as c4d on turbosquid: 3d models for games, architecture, videos. (1250314)
turbosquid
$10
Extern HDD
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$6
hdd sata wd10ezex 1tb
...hdd sata wd10ezex 1tb
3dexport
wd hdd sata disk model.
3ddd
free
HDD Transcend 320Gb
... transcend , жесткий диск
внешний жесткий диск transcend
без текстур
формат 3dmax, 3ds
3d_export
$10
External HDD 3D Model
...xport
hard disk drive external seagate usb storage hdd portable expansion data mobile
external hdd 3d model nkfrds 47740 3dexport
turbosquid
$5
HDD Rack Horizontal
...royalty free 3d model hdd rack horizontal for download as skp on turbosquid: 3d models for games, architecture, videos. (1289399)
turbosquid
$49
HDD Quantum Fireball
...l hdd quantum fireball for download as max, obj, 3ds, and fbx on turbosquid: 3d models for games, architecture, videos. (1630260)
3d_ocean
$10
Seagate External Hdd
... modeled in rhino4 3d and rendered with vray available formats:.3dm, .max(2011), .c4d(r12), .3ds, .obj textures:included mater...
Bay
3ddd
$1
Bay
...bay
3ddd
calligaris
стул bay итальянской фабрики сalligaris /max2011,fbx,obj,mat/
3ddd
$1
MDF / BAY
...mdf / bay
3ddd
bay , mdf italia
диван "bay"
*turbosmooth присутствует
turbosquid
$8
Bay
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
BAY XL
... giulio marelli
giulio marelli italia. bay xl.
диван, дизайн studio crgm в тканевом исполнении.
длина: 2.55
design_connected
$18
Bai Armchair
...bai armchair
designconnected
ondarreta bai armchair computer generated 3d model. designed by lizaso, ander.
3ddd
$1
Kichler Hayman Bay
...kichler hayman bay
3ddd
kichler , hayman bay
люстра kichler lighting 43256daw hayman bay
design_connected
$13
Bai Chandelier
...bai chandelier
designconnected
parachilna bai chandelier computer generated 3d model. designed by neri&hu.
3ddd
$1
Lamp poters bay
...lamp poters bay
3ddd
eichholtz
eichholtz, lamp poters bay
turbosquid
$32
Shuttle Bay
...ty free 3d model shuttle bay for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1475258)
turbosquid
$20
Iris Bay
...free 3d model iris bay for download as 3ds, c4d, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1367781)
5
turbosquid
$6
Rock 5-5
...urbosquid
royalty free 3d model rock 5-5 for download as obj on turbosquid: 3d models for games, architecture, videos. (1639063)
3d_export
$5
hinge 5
...hinge 5
3dexport
hinge 5
turbosquid
$10
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Calligraphic Digit 5 Number 5
...hic digit 5 number 5 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389333)
3ddd
$1
5 роз
...5 роз
3ddd
5 роз в стеклянной вазе
design_connected
$11
iPhone 5
...iphone 5
designconnected
apple iphone 5 computer generated 3d model.
3ddd
$1
Lola 5
...lola 5
3ddd
miniforms
lola 5 miniforms 300*65*134
3ddd
$1
Nexus 5
...dd
nexus , phone , телефон
google nexus 5 phone
3d_ocean
$15
iPhone 5
...iphone 5
3docean
3d 4d apple cinema iphone model modeling phone screen texture
iphone 5 3d model and texture realistic iphone 5.
3
turbosquid
$10
Mountain Bike 3 -3 of 3
...model mountain bike 3 (#3 of 3) for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1438752)
turbosquid
$6
Rock 3-3
...urbosquid
royalty free 3d model rock 3-3 for download as obj on turbosquid: 3d models for games, architecture, videos. (1628065)
turbosquid
$29
Books 150 pieces 3-3-3
...books 150 pieces 3-3-3 for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1384033)
turbosquid
$3
Genesis 3 Clothing 3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
hinge 3
...hinge 3
3dexport
hinge 3
3ddd
$1
Розетка 3
...розетка 3
3ddd
розетка
розетка 3
turbosquid
$50
is-3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Mountain Bike 3 -2 of 3
...model mountain bike 3 (#2 of 3) for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1438750)
turbosquid
$10
Mountain Bike 1 -3 of 3
...model mountain bike 1 (#3 of 3) for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1438743)
3d_export
$5
3 CATS
...3 cats
3dexport
3 cats pen holder