Thingiverse
20mm Scope mount (1 inch tubes) by Panzergruppe
by Thingiverse
Last crawled date: 3 years, 1 month ago
Printed in PETG at 60% infill. .2 mm layer height. I would not recommend PLA.
I tried this mount on a H&K SL8 .223 succesfully.Hold zero pretty well,
Bolts;
6x M4x40mm with 7 mm nuts,
3x M6x40mm with 10mm nuts
Feel free to improve! It was a lot of fun testing it on the range.
I tried this mount on a H&K SL8 .223 succesfully.Hold zero pretty well,
Bolts;
6x M4x40mm with 7 mm nuts,
3x M6x40mm with 10mm nuts
Feel free to improve! It was a lot of fun testing it on the range.
Similar models
thingiverse
free
Vesa mount (75 mm) to monitor stand pole (32.5 mm)
...erse
to hang a small monitor with 75 mm vesa mount to monitor stand pole. the post version has nut lock. i use m4 bolts and nuts
thingiverse
free
T mount for 8 mm lead nut by zomtronic
...t mount for 8 mm lead nut by zomtronic
thingiverse
t mount for 8 mm lead nut
thingiverse
free
8X 12 mm carbon tube motor mount by Quilote
...re i use the screws and the 8x 12 mm carbon tube motor mount best for nuts, obviously for the nuts, to prevent them from slipping
thingiverse
free
8X 16 mm carbon tube motor mount by Quilote
...re i use the screws and the 8x 16 mm carbon tube motor mount best for nuts, obviously for the nuts, to prevent them from slipping
thingiverse
free
RAMPS-FD 80 mm Fan Mount by Fillitup309
...older joints on the board if i attach the nuts. i think i will have to design clips to replace the nuts, or just get nylon nuts.
thingiverse
free
20x20 extrusion mount arm by Baphomet2017
...p part and left it for your own need.
parts:
m5 hummer nut
5x10 mm bolt (extrusion to joint)
5x25 mm bolt (joint to joint)
m5 nut
thingiverse
free
JBL 5.1 Soundbar mounting nuts by thedemri
...by thedemri
thingiverse
jbl 5.1 soundbar mounting nuts
replacement mounting nuts for jbl 5.1 soundbar
us with m4x16 mm hex screw
thingiverse
free
Nut holder for 19" Rack mount M5 M6 by 7eggert
... 6.4 mm / 12 mm / 1 mm
a washer 5.3 mm / 10 mm / 1 mm for the m5 version.
this
btw: it's plastics, don't expect too much.
thingiverse
free
Printable Tripod Mount No Captive Nut by loidolt
...e print was finished. you will want to glue the nut in to hold it in place if you use this mount instead of the original version.
thingiverse
free
Tronxy sensor mount by Santonian
...r (0.2 mm), the original did not fit well into the carrier
i made the nut hole a little bit wider, so i can fit a m3 nut into it.
Panzergruppe
thingiverse
free
Tronxy X3 Z axle top guide bushing by Panzergruppe
...tronxy x3 z axle top guide bushing by panzergruppe
thingiverse
bushing for top of z axle guide rods.
thingiverse
free
Tronxy X3 Reinforcerd Y motor bracket by Panzergruppe
...ave to file though it may depend on your're printers accuracy.
there is place for 6 m4 t-nuts, however i installed it with 3.
thingiverse
free
Tronxy X3 adjustable foots/legs by Panzergruppe
...nted them with petg .2 layer and 30 % infill. sorry for the shitty pictures, not in the mood for buying a expensive phone/camera.
thingiverse
free
Tronxy X3 Dial indicator gauge holder by Panzergruppe
...m-meter-precise-0-01-resolution-concentricity-test-ed/132014888576?sspagename=strk%3amebidx%3ait&_trksid=p2057872.m2749.l2649
thingiverse
free
Tronxy X3 simple bed stablizers by Panzergruppe
...late.(quick tip use calipers to make the lines!)
make sure for installation that the bearings run straight and are greased/oiled!
thingiverse
free
Motorcycle Chain lube system by Panzergruppe
...not fit a different chain/sprocket.
i did add another nozzle, might be usefull depending on the bike you are riding.
happy diy :)
Scope
3d_ocean
$3
Scope
...ns planet science scope sky space telescope univers
a classic scope used for telescopes for locating plannets or stars on the sky
3d_ocean
$14
Sniper Scope
...sniper scope
3docean
lens scope sniper
sniper scope. include: .max file(2010) with sniper scope objests and skylight.
turbosquid
$5
Scope
...e
turbosquid
royalty free 3d model scope for download as fbx on turbosquid: 3d models for games, architecture, videos. (1242084)
3d_export
$5
Sniper scope
...sniper scope
3dexport
sniper scope
turbosquid
$10
Scope
...
royalty free 3d model scope for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1499136)
turbosquid
$40
Scope
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
scope
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Scope
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
scope
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Scope
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
20Mm
3d_export
$20
german 20mm flak
...german 20mm flak
3dexport
german 20mm flak
turbosquid
$58
M-75 20mm AA
...squid
royalty free 3d model m-75 20mm aa for download as obj on turbosquid: 3d models for games, architecture, videos. (1174302)
turbosquid
$5
Drill Bit Set 6mm to 20mm
...ill bit set 6mm to 20mm for download as stl, sldpr, and sldas on turbosquid: 3d models for games, architecture, videos. (1257104)
turbosquid
free
Oerlikon 20mm anti-aircraft gun
...mm anti-aircraft gun for download as lwo, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1430549)
turbosquid
free
20mm Flak 38 Flakveirling (Simple)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$7
Ammo Box WWII US Military 20mm MK3
...mmo box wwii us military 20mm mk3 for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1360607)
cg_studio
$35
German 20mm MG151/20 Sprgr cartridge with cutaway3d model
...j - german 20mm mg151/20 sprgr cartridge with cutaway 3d model, royalty free license available, instant download after purchase.
cg_studio
$35
German 20mm MG151/20 Pzgr cartridge with cutaway3d model
...obj - german 20mm mg151/20 pzgr cartridge with cutaway 3d model, royalty free license available, instant download after purchase.
3d_export
$35
German 20mm MG15120 cartridge with cutaway 3D Model
...ammunition munition granate panzer airforce luftwaffe
german 20mm mg15120 cartridge with cutaway 3d model emeral_d 21635 3dexport
3d_export
$35
German 20mm MG 15120 cartridge with cutaway 3D Model
...mmunition munition granate panzer airforce luftwaffe
german 20mm mg 15120 cartridge with cutaway 3d model emeral_d 21633 3dexport
Tubes
archibase_planet
free
Tube
...tube
archibase planet
paint tube stationery
tube - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
free
tube
...tube
turbosquid
free 3d model tube for download as c4d on turbosquid: 3d models for games, architecture, videos. (1378271)
archibase_planet
free
Tube
...tube
archibase planet
mascara cosmetics make-up
tube 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
Tube pants
...tube pants
3dexport
tube pants
3d_export
free
Tube
...tube
3dexport
turbosquid
free
TUBE
...
free 3d model tube for download as blend, dae, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1672199)
turbosquid
$29
tube
...lty free 3d model tube for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1442047)
3ddd
$1
perfume tube
...perfume tube
3ddd
тюбик
perfume tube, тюбик
3ddd
$1
Olivieri Tube
...olivieri tube
3ddd
olivieri
кровать olivieri tube
turbosquid
$22
Tube
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Inch
3ddd
$1
Inch chair
...inch chair
3ddd
inch , vitra
vitra inch chair wood vray
3d_export
$7
shoes size from 5 inch size to 11 inch
...shoes size from 5 inch size to 11 inch
3dexport
shoes design women model sizing from 5 inch to 11 inch
turbosquid
free
BAZOOKA 236 INCH
...d
royalty free 3d model bazooka 236 inch for download as fbx on turbosquid: 3d models for games, architecture, videos. (1646746)
3ddd
$1
36 Inch Terrific Trio
...36 inch terrific trio
3ddd
круглый , скатерть
нойной столик - 36 inch terrific trio
turbosquid
$10
30 inch table
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Display 22 inch
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
currey 30 inches 6767
...currey 30 inches 6767
3ddd
currey&company
светильник настольный currey and company 6767 greta 30 inch table lamp
3d_export
$6
samsung 85 inch uhd tv
...samsung 85 inch uhd tv
3dexport
samsung 85 inch uhd tv with stand and normal both
turbosquid
$49
Hyde Sofa 88-inch
...
royalty free 3d model hyde sofa 88-inch for download as max on turbosquid: 3d models for games, architecture, videos. (1622670)
turbosquid
$44
Corwyn Sofa 85-inch
...royalty free 3d model corwyn sofa 85-inch for download as max on turbosquid: 3d models for games, architecture, videos. (1622689)
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)
1
turbosquid
$69
armchairs(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
ring 1+1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
RING 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
house 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Table 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
Formula 1(1)
...lty free 3d model formula 1 for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1567088)
design_connected
$11
No 1
...no 1
designconnected
sibast no 1 computer generated 3d model. designed by sibast, helge.
turbosquid
$2
desert house(1)(1)
...3d model desert house(1)(1) for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1055095)