Thingiverse
ZMR250/QAV250 Fatshark/AOMWAY camera mount by Painless360
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a 15 degree mount for an FPV camera that will suit any camera with a flat front (FatShark 600TVL, 700TVL, 960TVL or AOMWAY etc). The aperture is big enough to mount those cameras with the larger lenses (see images).
Us an elastic band /hairband to secure the camera and provide shock protection in the event of a crash.
Thanks for looking - happy printing!
Us an elastic band /hairband to secure the camera and provide shock protection in the event of a crash.
Thanks for looking - happy printing!
Similar models
thingiverse
free
Aomway mini camera 10 degrees mount. by PeteDee
...aomway mini camera 10 degrees mount. by petedee
thingiverse
aomway mini camera 10 degrees mount.
thingiverse
free
Fatshark camera mount by Brick85
...fatshark camera mount by brick85
thingiverse
mount for fatshark 700tvl with dampers.
thingiverse
free
Fatshark 600tvl to 32mm camera adapter by noishi
...shark 600tvl to 32mm camera adapter by noishi
thingiverse
adapter for mounting a fatshark 600tvl camera onto a 32mm camera mount
thingiverse
free
Fatshark Pilot HD camera mount by juniormachinist
...fatshark pilot hd camera mount by juniormachinist
thingiverse
this is a very simple fatshark pilot hd camera mount.
thingiverse
free
Fatshark 600 line Action Camera Mount by Meradin
...fatshark 600 line action camera mount by meradin
thingiverse
mount your fatshark camera on top of your sj400 action camera.
thingiverse
free
Fatshark 600TVL Camera Mount With 10 Degree Tilt by Roedkill
...atshark 600tvl camera mount with 10 degree tilt by roedkill
thingiverse
mount for the fatshark 600tvl camera with 10 degree tilt
thingiverse
free
FatShark Camera mount for Tweety by Protivizion
...vizion
thingiverse
some modifications of camera mount for fatshark camera and holes for ts5823 vtx
hole for buzzer.
thicker pad.
thingiverse
free
Spidex pro fatshark quick mount by Mrimstad
...atshark quick mount by mrimstad
thingiverse
snap on mount for fatshark range camera's
camera snaps inn and mount snaps on :)
thingiverse
free
aomway700 tvl camera mount by tbcab
...aomway700 tvl camera mount by tbcab
thingiverse
this fits a aomway 700tvl wdr camera.
thingiverse
free
lumenier QAV250 FatShark Camera Mount 15° by nuttcorp
... qav250 fatshark camera mount 15° by nuttcorp
thingiverse
fpv camera mount for a fatshark cam on a lumenier qav250 frame at 15°.
Aomway
thingiverse
free
Aomway 5.8G PATCH ANTENNA FOR FATSHARK by kkbin
...e antenna is only 30 rmb
v2 added a simple piece bracket with fan cover.
i printed in petg give it more durable.
you can try pla.
thingiverse
free
module bay for TBS fusion module aomway v1 mod by Dadog92
...module bay for tbs fusion module aomway v1 mod by dadog92
thingiverse
module bay for tbs fusion module aomway v1 mod
thingiverse
free
Aomway Commander V1 & V2 Goggles Faceplate adjustment insert by H31D
...pe to eliminate light leak - the gap is to small for 3d printed part with 0.4 nozzle ;)
also - mirror the part for second insert.
thingiverse
free
AomWay 700TVL support for Runcam mount by Corki
...nt by corki
thingiverse
this is adapter for this cam : https://hobbyking.com/fr_fr/aomway-700tvl-camera-pal-version-for-fpv.html
thingiverse
free
Aomway commander - make comfortable by bernitz
... with some hot glue over the gaps that may be left at the top of the faceplate to stop light leak, print 4, two of them mirrored.
thingiverse
free
Grasshopper Drone by StringyMcStringface
...mag - £13 banggood lipo charger - £5 banggood aomway antenna 5.8ghz x 2 - £10 banggood 8 x...
thingiverse
free
Skyzone02C FPV Goggles 3rd Headstrap Adapter
...all three straps(top, and 2 sides) from banggood ( https://www.banggood.com/aomwayhead-band-for-commander-fpv-goggles-p-1171326.html?rmmds=myorder&cur_warehouse=cn ) i printed this design with "supports everywhere" simply...
thingiverse
free
AstroX J5 frame JohnnyFPV antenna GPS Xiaomi Yi mount
...tri-bladed prop vtx: akk x2-ultimate 1200 mw vtx antenna: aomway cloverleaf, tbs triumph nozzle temperature: 230c bed temperature: 65c...
thingiverse
free
Aomway Commander Faceplate for smaller faces
...all layer height to look good. use 10 perimeters to make it solid.
the solidworks file is attached if you want to edit something
thingiverse
free
Zeiss Cinemizer To FPV Goggles Full Mod by RCConcepts
...as comfy and convenient as the fatshark, skyzone or aomwaycommander googles which are truly designed for fpv. this mod...
Painless360
thingiverse
free
30.5mm flight controller mount (used in R/C Boat here) by Painless360
...ed in r/c boat here) by painless360
thingiverse
made for the project here and maybe useful to you too!
happy flying or boating!
thingiverse
free
Tiny Hawk 2 Candy Drop by JohnPep
...hawk 2. i used emax es08a ii servo. see painless360 video for wiring help https://youtu.be/n69128cofpc. specifically, i soldered signal...
thingiverse
free
Old Exacto Blade Box Cutter by Painless360
...de is exposed so be careful but they can be handy on the desk for quickly cutting vinyl, paper or cutting the tape to open boxes!
thingiverse
free
Halloween Bats for decoration of fridge magnet by Painless360
...and in celebration of that i've made this new model. available in both a single and multibat configuration.
happy halloween!
thingiverse
free
ZOHD 4S LI-Ion Battery Pack Belt Clip (DJI FPV HD Goggles) by Painless360
...o something that can hang on your belt. i use mine for the dji hd fpv goggles and it works a treat, huge capacity and small too..
thingiverse
free
Flynoceros Æther Quadcopter Motor Cable Clips by Painless360
...ep the cables tidy and secure.
sharing them in case others can use them! see them my 'endurance quad build' on youtube..
thingiverse
free
Parametric Buzzer Holder by wojked
...is inspired by the zmr250 piezo buzzer holder by painless360 diameters of the standoff and the buzzer can be...
thingiverse
free
Bixler V2 Screw Hole Inserts by Painless360
...new bixler v2 from hobbyking. they make those openings look a little more finished..
https://www.youtube.com/watch?v=8f-vdfgupck
thingiverse
free
Rocksta 1/24 Mini Rock Crawler FPV Pod by Painless360
...so add a blob of hot glue to where the antenna attaches to the vtx to stop it popping of if the model flips over.
happy driving!
thingiverse
free
Picture Hooks (for screw and glue application) by Painless360
...d the other is designed for glue (i used 5 min epoxy to attach it to the back of the sign).
hope they some in handy for someone!
Qav250
turbosquid
$1
QAV250 quadcopter frame
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
motor's wires arm mount for ZMR250 , QAV250 by Quack_113
...motor's wires arm mount for zmr250 , qav250 by quack_113
thingiverse
motor's wires arm mount for zmr250 , qav250
thingiverse
free
QAV250 - VTX 30.5 mm X 30.5 mm mount by Quack_113
...v250 - vtx 30.5 mm x 30.5 mm mount by quack_113
thingiverse
vtx (30.5mm*30.5mm) mount on the edge section of qav250,zmr250 frame
thingiverse
free
ZMR250 , QAV250 wire cover on middle section by Quack_113
...zmr250 , qav250 wire cover on middle section by quack_113
thingiverse
zmr250 , qav250 wire cover on middle section
thingiverse
free
R-XSR QAV250 holder by silentjet
...in case of pla plastic (known issue with creator pro printer + pla filament). the other way is to make a vertical cut on a rings.
thingiverse
free
Drone propeller guard and leg for 250 class by r9kawai
...screw. (hole pattern 2×19mm/2×16mm) i made it for holyro qav250 but, i think can use it to another same...
thingiverse
free
Ranger G2 Omnibus F4 Pro FC Mount Volantex by edwardchew
...pnphttps://www.banggood.com/volantex-rc-v757-6-v757-6-ranger-g2-880mm-wingspan-epo-fpv-rcairplane-aircraft-pnp-p-1133817.html?p=dg23031123036201501p omnibus f4 pro fchttps://www.akktek.com/f4-support-sd-card.html?acc=6123 mini gpshttps://www.banggood.com/dual-bn-220-neo-m8n-gps-glonass-antenna-module-ublox-m8030-ttl-level-p-1208588.html?p=dg23031123036201501p mini gps 2https://www.banggood.com/nz-gps-for-naze32-flip32-6dof-10dof-best-for-qav250zmr250-multicopter-quadcopter-p-1015134.html?p=dg23031123036201501p receiver with ppm output for this fchttps://www.banggood.com/frsky-2_4g-8ch-d8r-xp-d8rxp-telemetry-receiver-p-1008354.html?p=dg23031123036201501p printer i...
thingiverse
free
Extended legs for F450 by Victor_Java
...this frame for which i designed this project - https://ru.aliexpress.com/item/nartor-rc-diy-high-quality-carbon-fiber-mini-qav250and-f450-fpv-quadcopter-frame-holder/32819511473.html ...
thingiverse
free
R-XSR and VTX antenna holder for QAV250 by silentjet
...:4584768, which adds vtx antenna mount holder. it is not a remix was redesigned from scratch with a better fit for r-xsr receiver
thingiverse
free
HC-SR04 sensor holder for QAV250 by surganova
...erse
hc-sr04 sensor holder for the drone. hole distance - 30.5mm. holes are 3.2 mm for 3mm screws. use rubber band to mount it.
Zmr250
thingiverse
free
motor's wires arm mount for ZMR250 , QAV250 by Quack_113
...motor's wires arm mount for zmr250 , qav250 by quack_113
thingiverse
motor's wires arm mount for zmr250 , qav250
thingiverse
free
Bn-220 gps mount on ZMR250's arm by Quack_113
...ne so i cant link my model the model i took and remixed then im gonna put the link here
https://www.thingiverse.com/thing:3547332
thingiverse
free
QAV250 - VTX 30.5 mm X 30.5 mm mount by Quack_113
...thingiverse vtx (30.5mm*30.5mm) mount on the edge section of qav250,zmr250 ...
thingiverse
free
ZMR250 , QAV250 wire cover on middle section by Quack_113
...zmr250 , qav250 wire cover on middle section by quack_113
thingiverse
zmr250 , qav250 wire cover on middle section
thingiverse
free
ZMR 250 TBS Crossfire immortal T-Antenna holder mount by Ben___
...simple robust tbs immortal t- antenna mount for old zmr250 frame. print in pla or tpu, how you like....
thingiverse
free
ZMR 250 everything you need by franksogliola
...zmr 250 everything you need by franksogliola thingiverse zmr250 chinese clone evey thing you need front led strip...
thingiverse
free
ZMR250 SMtuned / Racing Drone / Race Copter / Quadrocopter by SimonFranz5
...adrocopter by simonfranz5
thingiverse
hello,
this is a very light version of zmr 250 (all parts 60-70g)
assembling is very easy.
thingiverse
free
ZMR250 Micro FPV Camera Mount by marcotheboy
...mera positioned 5mm lower (in case you need to tilt the camera upwards a lot)
this should work with any camera that is 19mm wide.
thingiverse
free
ZMR250 Mount for Antenna-GPS-XT60 by Rickolas
... modified the xt60 hole to allow the amass marked xt60 connector that has a more rectangular profile rather than a bevelled edge.
thingiverse
free
ZMR 250 Radio shelf and antenna mount by fluxell
...thingiverse i needed to make some room on my zmr250 so i added a shelf. the post wraps used...
Fatshark
thingiverse
free
Fatshark goggle switch by ChopperDan
...ch by chopperdan
thingiverse
replacement togle switch for fatshark goggles. somehow managed to lose both of mine so here we are.
thingiverse
free
DJI FPV goggle strap adapter by ErikWTN
...adapter by erikwtn thingiverse adapter lets you use standard fatshark style straps with the dji fpv goggles. this is...
thingiverse
free
Fatshark scout external antenna mod by Morokolli
...space inside, so forget cap button screws, use very low profile ones.
you also need 90 degree angle pigtail sma - u.fl connectors
thingiverse
free
Nutmeg Pusher Whoop mod with Gopro Naked mount by M_Tops
...crossfire micro tx : tbs tango 2 goggles : fatshark hdo hd camera #1 : gopro 6 black...
thingiverse
free
fatshark dominator v3 button cover by b_artu
...fatshark dominator v3 button cover by b_artu
thingiverse
fatshark dominator v3 button cover
thingiverse
free
Fatshark Shark Byte VRX Patch Replacement Tile by Adninco
...ue or screws to worry about.
the finer the layer height, the less clean up to get the tile to sit flush. i printed these at 0.12.
thingiverse
free
DJI FPV googles and Rapidfire adapter (no wires, deatachable) by slibbinas
...uruav adapter for rapidfire (metal case and pcb with bec):https://www.banggood.com/uruav-5_8g-rx-port-3_0-plus-dji-digital-fpv-goggles-low-voltage-alarm-simulation-receiver-board+metal-adapter-mounting-combo-for-dji-fatsharkfpv-goggles-p-1707616.html audio 4 pole and power jacks 5521 used:https://www.aliexpress.com/item/4000575547824.htmlhttps://www.aliexpress.com/item/32910707639.html you...
thingiverse
free
PyroPatch - Improved Fatshark Goggle Mount by micaheli
...into place to keep them safe/secure.
i've included the designs in step and f3d format if you'd like to give it a tweak.
thingiverse
free
Fatshark goggle to cam and infrared led ring adapter by rfoerster
...are: you cannot run the fan on 3s!
update 12/12/2020:
added pictures
added 26mm bracket for normal width cameras in hs1177 format
thingiverse
free
Fatshark HDO2 Goggles Focus Protectors by Dolphin1
... improve upon that.
i'm new to printing, this is my first design here, basically i just used default print settings with pla.
Camera
3d_export
$30
Tripod 3D Model
...tripod 3d model 3dexport tripod camera photography studio lighting 3d virtualz tripod 3d model virtualz...
3d_ocean
$29
Low Poly Sports Bike
...2013. lighting with vray light and also has vray camera ...
3d_ocean
$29
Scania Truck
...trailer vehicle high poly truck with vray lighting and camera ...
3d_ocean
$29
Parrot Bebop Drone
...parrot bebop drone 3docean aircraft aviation camera chopper dji dron game helicopter parrot-bebop-quadcopter-drone phantom propeller quad...
3d_ocean
$49
Interior Vray Scene with 3 RenderReady Views + PSD
...team7 textures vray interior vray scene with 3 renderready camera realistic v-ray & 3ds max 2014 interior scene, fully...
3d_ocean
$19
Western Gallow Camera Ready
...nd animated wild west wooden gallow. ready gibbet model for both wild west movie and game use. included files : .max (vray), ....
3d_ocean
$15
Highpoly 3d Model of Electrostatic Machine
...rigged:no animated: no uv mapped: no unwrapped uvs: yes camera: 0 lights: 0...
3d_ocean
$5
3d Text and Object Mockup - Wall
...visualisation vray white what’s included: vray rendering setup vray camera, vray lights and shadow studio scene render scene 5852×3901...
3d_ocean
$12
Google Cardboard
...(with .psd files included) + multiple positions + real camera effects (vray 3.0) +...
3d_ocean
$6
3d Text and Object Mockup - Wall
...visualisation vray white what’s included: vray rendering setup vray camera, vray lights and shadow studio scene render scene 5852×3901...
Mount
3ddd
$1
Vega flush mount lamp
...t lamp
3ddd
dimensions: 22.5"wx22.5"dx12"h
размеры: 58см х 58см х 31см
v-ray light included | v-ray light внутри
3ddd
$1
Currey & Company Balthazar
...quality of the glass elements. product name: balthazar ceiling mount dimensions: 21h x 18d x 18w number of lights:...
3d_ocean
$5
Rock_6
...rock_6 3docean mount mountin rock rocks stone rock_6….............1474.polygon. .1476.vertices. 4096 * 4096 texture....
3d_ocean
$19
Low Poly Hotel
...and flower pots, trees, brunches, street lights, trashcans, wall mountd air freshener, air conditioners, fire...
3d_ocean
$25
Low Poly Buildings
...storehouse/warehouse, one grocery/minimarket, flower beds and flower pots, wall mountd air freshener, air conditioners, air intake,...
3d_ocean
$5
rock_4
...rock_4 3docean low polygon mount mountin old rock rock stone rock_4…...............1419.polygon. .1421.vertices. 4096 * 4096...
3d_ocean
$5
mountain_9
...n_9…........................12560 polygon. ...12562 vertices. 4096 * 4096 texture obj , fbx , and blend format model. game ready.
3d_ocean
$25
Low Poly City Block
...and flower pots, trees, brunches, street lights, trashcans, wall mountd ...
3d_ocean
$5
Rock_3
...rock_3 3docean mount mountin rock stone rock_3…..............6048.polygon 6127.point. 4096*4096 texture. obj,fbx,blend format model....
3d_ocean
$5
Rock_2
...rock_2 3docean mount mountin rock stone rock_2…...............3196.polygon 3248.point. 4096*4096 texture. obj,fbx,blend format model....