Thingiverse
Tumbleweed Plane by Twisted2aT
by Thingiverse
Last crawled date: 3 years, 1 month ago
The 'Tumbleweed' is inspired by Experimental Airlines build techniques (https://www.youtube.com/user/ExperimentalAirlines), the popular Mini Talon, and other EA type builds from the FPV & RC community. I designed and built this for 3 reasons:
Put a spare motor to use that I had no idea what to do with.
CAD and 3D printing design skill improvement.
Expand on the EA build techniques to include 3D printed parts for unique configurations and easier repair/replacement of hardware after destructive crashes.
This is a work in progress, with lots of room for improvement and weight savings. My current version is ~2.1kg with a 4,000mAh 6S battery all the way up front against the front Bulkhead. Below is my parts list for electronics and the print materials & parameters I used for the first iteration.
AUW ~2kg (with GoPro)
Wingspan: 60 inches
Wing chord: 9.5 inches
Fuse Length: ~32 inches
Motor: Cobra 2820 840kV
Prop: APC 9X6
FC: F405-Wing (INav 2.5)
CRSF Diversity Rx
AKK 5.8GHz VTx
Ratel 2 cam
Batt: 4,000mAh 6S
The following parts were printed with TPU at 10% infill and 2 layers on the perimeter, top, and bottom layers:
Winglets
Forward Bulkhead
Nose Base
Nose Front
Rear Skid
All other parts were printed with PETG with 15% infill (overkill in many instances).
Dimensions for the foam board parts (wings, fuse, tail) will be provided shortly (by 2/24/21) to aid in your builds.
Put a spare motor to use that I had no idea what to do with.
CAD and 3D printing design skill improvement.
Expand on the EA build techniques to include 3D printed parts for unique configurations and easier repair/replacement of hardware after destructive crashes.
This is a work in progress, with lots of room for improvement and weight savings. My current version is ~2.1kg with a 4,000mAh 6S battery all the way up front against the front Bulkhead. Below is my parts list for electronics and the print materials & parameters I used for the first iteration.
AUW ~2kg (with GoPro)
Wingspan: 60 inches
Wing chord: 9.5 inches
Fuse Length: ~32 inches
Motor: Cobra 2820 840kV
Prop: APC 9X6
FC: F405-Wing (INav 2.5)
CRSF Diversity Rx
AKK 5.8GHz VTx
Ratel 2 cam
Batt: 4,000mAh 6S
The following parts were printed with TPU at 10% infill and 2 layers on the perimeter, top, and bottom layers:
Winglets
Forward Bulkhead
Nose Base
Nose Front
Rear Skid
All other parts were printed with PETG with 15% infill (overkill in many instances).
Dimensions for the foam board parts (wings, fuse, tail) will be provided shortly (by 2/24/21) to aid in your builds.
Similar models
thingiverse
free
Ar Wing Pro 2x21700 li-ion Nose by Fagge
...2 of these betteries in the nose and 4 in the compartment as a 6s configuration, with perfect cg balancing without extra weights.
thingiverse
free
pylon racer by Sulhan
... setup:
brushless 2204 ccw 2300kv
tgs propeller 4.75 x 4.75
esc 20a
lipo 850mah 3s
servo 9gr
offcourse you can use your own setup
thingiverse
free
Mugi Nose Skid Wing Tips Skids & Motor Mounts
...ctures.
print nose skid with 1.2mm shell / 4 layers and 30% infill as a minimum. also as the base is curved use raft or supports.
thingiverse
free
Defiant Wings Defiant 28 Parts by Apru
... these parts with minimum top/bottom layers and lowish infill. i used 2 top/bottom, 2 perimieters, .2 layer height and 30 infill.
thingiverse
free
Speed 400 Pylon Racer by Dale_w
... it's just for show. mine will be carved out of solid balsa as per the pics. print it if you like, spar / joiner hole is 4mm.
thingiverse
free
FPV49 Delta wing nose (for FPV and mobius) by FPVrider
...nut and bolt from the side.
it is attached with bolts to main canopy.
note: also make the whole canopy, but that is under testing
thingiverse
free
Dual Relay holder for Quad Spotlights for Mini R53 Cooper S
... slot.
the bracket will then bolt to the front bulkhead with two self tapping screws.
printed in pla, 20% infill with no supports
thingiverse
free
YAY - FPV Racing Flying Wing
...suitable for selected motor servo sg-90 or any other similar battery about 1500 mah 3-4s 1p (weight 150 g.)...
thingiverse
free
Joinville Entrance Windmill by marcelklug
..., 20% infill, without supports.
only the top part were printed with 30% infill.
the parts were painted and glued after the print.
thingiverse
free
E-wings Vortigaunt camera nose by iwan_canobi
... runcam swift (or equivalent) fpv camera.
will probably require supports for the raised section if you print it facing upwards.
Tumbleweed
turbosquid
$22
Tumbleweed - Max Scanline
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$49
Low Poly Cartoonish Western Pack
...door games low lowpoly old saloon sheriff store town tumbleweed unity videogames west western wild suitable for games, 3d...
free3d
$24
Tumbleweed
...e coordinate axes
the model corresponds to the real size
reset path texture
reset transforming objects
texture resolution:512x512
thingiverse
free
tumbleweed for 3d Print by Syzguru11
...tumbleweed for 3d print by syzguru11
thingiverse
fill your empty spaces with tumbleweed
sketchfab
$7
Tumbleweed
...reenshot)
polygons: 15180
vertices: 7593
i hope you enjoy the model. - tumbleweed - buy royalty free 3d model by ed+ (@edplus)
renderosity
$7
Tumbleweed Tank
...loseups, unpacked runtime size: 150 mb.<br />
suitable for animations. historical reconstruction/original design.</p>
thingiverse
free
Tumbleweed mitre box for cheap bastards by ej0rge
...errated blade, something from the dollar store in stainless steel.
the 30 and 45 degree half boxes are offered just for giggles.
renderosity
$8
Amaranthus retroflexus DR
...like redroot pigweed, red-rooted pigweed, common amaranth and common tumbleweed<br /> it is native to the tropical america, but...
renderosity
$24
Amaranthus retroflexus DR - Extended License
...like redroot pigweed, red-rooted pigweed, common amaranth and common tumbleweed<br /> it is native to the tropical america, but...
Plane
3d_export
$5
Plane
...plane
3dexport
unusual plane)
archibase_planet
free
Plane
...plane
archibase planet
plane lath slat
plane n011207 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
design_connected
$11
Plane
...plane
designconnected
tom dixon plane computer generated 3d model. designed by dixon, tom.
turbosquid
$20
Plane
...lane
turbosquid
royalty free 3d model plane for download as on turbosquid: 3d models for games, architecture, videos. (1214347)
turbosquid
$50
Plane
...e
turbosquid
royalty free 3d model plane for download as fbx on turbosquid: 3d models for games, architecture, videos. (1290318)
turbosquid
$20
Plane
...e
turbosquid
royalty free 3d model plane for download as max on turbosquid: 3d models for games, architecture, videos. (1214127)
turbosquid
$15
Plane
...e
turbosquid
royalty free 3d model plane for download as c4d on turbosquid: 3d models for games, architecture, videos. (1413357)
turbosquid
$5
plane
...ne
turbosquid
free 3d model plane for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1424281)
turbosquid
free
plane
...ne
turbosquid
royalty free 3d model plane for download as ma on turbosquid: 3d models for games, architecture, videos. (1655587)
turbosquid
free
Plane
...osquid
free 3d model plane for download as 3ds, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1385376)