Spyderco Tri-Angle Sharpmaker Upgrades by leadingedge

Last crawled date: 3 years, 1 month ago

UPDATED - 4 April 2021
Some upgrades for the Spyderco Tri-Angle sharpmaker system.
I have 2 printable platforms with all angles from 20-60 degrees (inclusive sharpening angle, so 10-30 degrees per side). The first platform is 20-42 degrees (10-21 per side) and the second one is 44-60 degrees (22-30 per side).
I also have 19 individual adapters to enable sharpening your knives at any angle between 10-30 degrees per side with your existing Spyderco Sharpmaker (20-60 degrees inclusive angle). You will have to print 2 of each angle you want.
The individual adapters simply slot into the current 30 degree angle slots of your Spyderco Tri-angle base, and your Tri-angle rods slot into the adapters.
In the below link you will find my adapter for using the Spyderco Tri-Angle ceramic rods with a Lansky sharpening system:
https://www.thingiverse.com/thing:4736877
If you like my designs, please send me a tip (link below) so I can keep designing awesome accessories for free. I use any money sent to me for purchasing filament to test my designs so I can make sure they are good to go.
paypal.me/leadingedge777
UPDATES:
10 Feb 2021 - I changed the design to enable the use of the brass hand protection rods, and I added angles from 52-60 degrees (25-30 degrees per side)
4 Apr 2021 - All files replaced with new ones, some of the spyderco tri-angle rods fit was too tight, so I re-designed them with slightly bigger slots to accommodate all of the different spyderco rods (White and Brown).
NOTE:
My 3D printable sharpening system to sharpen just about anything you can think of:
https://www.thingiverse.com/thing:4135236
My other useful designs:
https://www.thingiverse.com/leadingedge/designs