Spiralized LED strip lamp 3d model
Warning. This content is not moderated and could be offensive.
tobacco
3dmdb logo
Thingiverse
Spiralized LED strip lamp

Spiralized LED strip lamp

by Thingiverse
Last crawled date: 4 years, 4 months ago
I designed and printed a lamp that's based on a ws2812b-LED strip. The LED strip is connected to an ESP8266 board running WLED and a 5 volt power supply.
The lamp consist of two parts: a cylinder on the inside that has a groove to hold the LED strip and a translucent cover that is put over the cylinder.
The groove of the spiral is 3mm deep and has a height of 12mm and will fit any LED strip that has a height of less than 12mm. The total length of the spiral is about 2 meter / 6.5 feet.

Tags