Thingiverse
Ork Warlord or Ghaz using a Dreadknight by JtStrait72
by Thingiverse
Last crawled date: 3 years, 1 month ago
The parts included are sized to work with a GK Dread knight. The elbow pins are positioned and proper size for the servo attachments on the dk arms. There are 2 claws of different sizes to pick from. The larger one has a movable wrist for posing.
On the top of the motor where the carburetor is, between the exhausts, my buddy had to remove the carb to get it to fit properly when he built it. I had envisioned positioning the motor higher up so its your call if you use it that way. There are some gaps either way you build and will need some GS filling
He used a Sigmar Ironjaw Megaboss torso and some other bits to make the ork, but i am sure any ork you want to mod will work.
Many thanks to Unistrut, McMarx, and Agentsmith99 without your guys work i would not have had the bits to do this litterally overnite. Oh since its in the pic, the "Skorcha" trakk is also done using Unistruts buggy parts. Stole the gunner basket, skorcha, and motor from it (to make the fuel pump) and a few barrels I put together when I made the 3 of them. (dont remember where i got the flamer head tho) most of you should be able to cobble them up yourselves. But, if needed ill throw the mod parts up. Enjoy, my buddy was happier than a Stormboy with a new rocket pack.
On the top of the motor where the carburetor is, between the exhausts, my buddy had to remove the carb to get it to fit properly when he built it. I had envisioned positioning the motor higher up so its your call if you use it that way. There are some gaps either way you build and will need some GS filling
He used a Sigmar Ironjaw Megaboss torso and some other bits to make the ork, but i am sure any ork you want to mod will work.
Many thanks to Unistrut, McMarx, and Agentsmith99 without your guys work i would not have had the bits to do this litterally overnite. Oh since its in the pic, the "Skorcha" trakk is also done using Unistruts buggy parts. Stole the gunner basket, skorcha, and motor from it (to make the fuel pump) and a few barrels I put together when I made the 3 of them. (dont remember where i got the flamer head tho) most of you should be able to cobble them up yourselves. But, if needed ill throw the mod parts up. Enjoy, my buddy was happier than a Stormboy with a new rocket pack.
Similar models
thingiverse
free
Ork Scrap Bits by JayMull420
...
resize to fit your needs, what you see in the pictures is what you get in the zip.
i hope someone can make use of them.
enjoy !
thingiverse
free
Ork Objective Markers by JayMull420
... army, so i had to make them some objective markers.
they are 40mm.
i used the 40k ork symbol by kombatunit to make these.
enjoy!
thingiverse
free
Epic Ork Skorcha 2.0 by FuegoCruzado
...ger than the old one.
it is easier to print, but you have to use supports.
old version: https://www.thingiverse.com/thing:2771525
thingiverse
free
Epic Ork Skorcha 1.0 by FuegoCruzado
...ic ork skorcha 1.0 by fuegocruzado
thingiverse
ork skorchas for epic, 6mm
new version: https://www.thingiverse.com/thing:2847605
thingiverse
free
Re shaped parts for a better base-spinning Gear Heart. by ellasaro
...the original shape of the handle didn't work for me.
3) i also had to make the handle gear bigger.
hope you find it useful!
thingiverse
free
Modded BD's Tarantula X-Axis Motor for M3x20 by lookto
....
this approach only uses three screws to mount the motor. its sturdy enough and was an easy way to modify. hope you like it. :)
thingiverse
free
Warthog Joystick Hotas - DMS 4-way switch MOD by BrziJoe
...t a bit of material after assembling it to hotas, as in direction up there was collision with "nose up" part. no biggy.
thingiverse
free
robotic lawn mower - alternative motors by Andy4print
...", you can use these motors and parts for your own design. the drive motors are tested for mowers with a weight up to 4,8kg.
thingiverse
free
Mechanical Desk Toy by MinervaNuova
...uire a bit of sanding to get them working right, for example on the main arm i would recommend sanding the 6 teeth a bit sharper.
thingiverse
free
Ork soldiers with rifles set #1 by GRAYGAWR
...tended. parts are created by me as a way of artistic expression. these models are for personal use only and should never be sold.
Dreadknight
thingiverse
free
Addon-parts for Nemesis Dreadknight upgrade kit
...n find my how-to notes on the conversion here:https://stephanius40k.blogspot.com/2020/02/building-better-nemesis-dreadknight.html
thingiverse
free
Nemesis Warsuit by sirslamb
...sword and leg plates credits: redemptor dread parts: felixthecrazy dreadknight matrice666https://www.thingiverse.com/thing:4587620 invictor warsuit: g4m13https://www.thingiverse.com/thing:4154049 invictor closed cockpit:...
cg_trader
$7
GAREN DREADKNIGHT | 3D
...models! league of legends wild rift garen champion lol gamer videogame miniature figurine knight dreadknight miniatures figurines
Jtstrait72
thingiverse
free
Eldar multi laser by JtStrait72
...eldar multi laser by jtstrait72
thingiverse
gun for eldar jetbike.
thingiverse
free
Dark eldar Dark lance by JtStrait72
...dark eldar dark lance by jtstrait72
thingiverse
weapon for de jetbikes
thingiverse
free
Sabre_gun_turret_mk6r by JtStrait72
...onnect the chair you will need a standing operator.
note there is no head for the gunner, i use extras left over from other kits.
thingiverse
free
Wounds Counters by JtStrait72
...he new 40k. skull or explosion indicator also on dial. each dial uses 2 or 3, 6.4mm x 1.3mm magnets (found at home depot or ebay)
thingiverse
free
3 tier paint rack for GW pots by JtStrait72
...cut to 12 inch(305 mm) length. make 9 dowels your preferred length, put them in the guides, glue in place, put paint on the rack.
thingiverse
free
Heavy mortar with quad gun remix by JtStrait72
... the wheels were made wider and them and the axle were split in half.
as requested i added some very basic assembly instructions.
thingiverse
free
Big Plasma Cannon Turret by JtStrait72
...ailed instruction pdf in the download.
3/18 added the missing mk_d-4lt_pc_turret_rtside. sorry for any issues it may have caused.
thingiverse
free
Automated Weapon Platform Mod kit (Tarantula) by JtStrait72
... intended. parts are created freehand in 3d modeling software. these models are for personal use as proxies and are not for sale.
thingiverse
free
mek gunz using grot tanks by JtStrait72
...dels i built, using 2 boxes of grot guns and two sets of grot tanks, the 3d printed parts and some wire i got at the local lowes.
thingiverse
free
FIGURE PAINTING SYSTEM by JtStrait72
...ould work just fine but if you try it and have issue leave a message or post and ill try to hop back on it and get it fixed asap.
Warlord
turbosquid
$5
Orc Warlord
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Warlord Helmet
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$19
Warlord Scythe3d model
...warlord scythe3d model
cgstudio
.max - warlord scythe 3d model, royalty free license available, instant download after purchase.
3d_export
$19
Warlord Scythe 3D Model
...nife cut razor battle ready gameready game fight fighter fighting king queen
warlord scythe 3d model martialartist 22628 3dexport
3d_export
$75
Warlord Battle Titan 3D Model
...dexport
warhammer robot wh40k 40 000 titan warlord bot gun guns 3d detailed
warlord battle titan 3d model craigr29 82213 3dexport
turbosquid
$31
Warcraft Warlord Unity PBR VR / AR / low-poly 3D model
.../ low-poly 3d model for download as ma, fbx, and unitypackage on turbosquid: 3d models for games, architecture, videos. (1302305)
3d_export
$55
RPG 7 low poly 3D Model
...east weapon gun anti tank military shoulder launched projectile warlord rpg 7 low poly 3d model mkiii 19568...
3d_ocean
$7
Long Handled Sword
...old poly polygon quads simulation stylized sword unwrapped uv warlord warrior weapon weathered it is a stylized long handled...
3d_export
$9
Chery Logo 3D Model
...car-maker. for other uses, see duan qirui, a chinese warlord and politician, or cherry (disambiguation) or cherie (disambiguation).chery automobile...
thingiverse
free
Vikings warlord by QuentinSapin
...vikings warlord by quentinsapin
thingiverse
vikings warlord for board game.
Ork
3d_export
$15
ork-warkraft
...ork-warkraft
3dexport
ork-warkraft.
3d_export
$5
head ork
...head ork
3dexport
3d model head ork (sculpt)
turbosquid
$100
ORK
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$165
Ork Chieftan
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$49
Red ORk Axe3d model
... axe3d model
cgstudio
.fbx .ma .mb .obj - red ork axe 3d model, royalty free license available, instant download after purchase.
3d_export
$90
Ork Gunwagon Tank 3D Model
...ork gunwagon tank 3d model
3dexport
tank fantasy concept
ork gunwagon tank 3d model vpcreis 39469 3dexport
3d_export
$39
Red ORk Axe 3D Model
...rcraft elf magic fantasy character game monster 3d model surface type polygon statue
red ork axe 3d model rmodeler 46590 3dexport
turbosquid
$4
Orc Apothacary Ork Mad Dok
... free 3d model orc apothacary ork mad dok for download as stl on turbosquid: 3d models for games, architecture, videos. (1674486)
3d_export
$5
ork base mesh
...tact me please. please don't forget to rate the model, for us it is very important :) formats: c4d; blend; obj; fbx; ztl; stl
3d_export
$40
Ork Berserk
... is desirable to use a shader with a two-sided display of polygons.<br>faces 17333<br>verts 16568<br>tris 32561
Using
3ddd
$1
US flag
...us flag
3ddd
флаг
us flag
3d_export
free
Among us
...among us
3dexport
among us red
3d_export
free
Among Us
...among us
3dexport
this 3d-model of a character from the game "among us". it can be used as a toy or decoration.
3d_export
$6
among us
...among us
3dexport
doll from among us in red
3d_export
$5
amoung us
...amoung us
3dexport
amoung us character. was created by cinema 4d 19
3d_export
$5
Humvee us
...humvee us
3dexport
humvee us 3d model good quality for animation
3d_export
$15
among us
...among us
3dexport
turbosmooth modifier can be used to increase mesh resolution if necessary
3d_export
$25
mailbox us
...mailbox us
3dexport
low poly model mailbox us. modeling in the blender, texturing in substance painter
design_connected
$13
Use Me
...use me
designconnected
sitland use me computer generated 3d model. designed by paolo scagnellato.
3d_export
$5
Among Us
...rt
the among us model comes in a variety of colors that can be customized by anyone, and even works with little in the animation