Thingiverse
Nut & Washer Retainer for modified Cadillac crossbar kit for a Chevy Bolt Premier by elhalpern
by Thingiverse
Last crawled date: 3 years, 4 months ago
Thanks to all those that came before me on the Cadillac crossbars for the Bolt Premier roof rails.
This part is also described in the ChevyBolt.Org at this URL:
https://www.chevybolt.org/threads/crossbars-for-premier-trim-roof-rails.5441/page-4#post-396066
I paid $233 with shipping from a known GM parts distributor and was concerned about the accuracy of cutting the rails and the crossbar compatibility with Thule fork mount rails.
After opening the box from GM I verified that the crossbars do in fact need to be cut, and noticed that the four black mounts are each unique and labeled LF, RF, LR, & RR.
I was also concerned that the crossbars themselves might have a mitered cut and would effect how the rack mounted. Fortunately, the end cuts are not mitered in any significant way.
I chose just to take the excess off of one end. The bars are arc'd and curved upward (convex) and taking the extra off one end is not an issue. I used an 80 tooth blade on my $100 Ryobi chop saw and did not find it necessary to clamp them in place for cutting. I've cut aluminum with various chop saws in the past and although they're made for wood, aluminum is fairly safe if you're careful.
*** use either a face shield like that for wood lathe work, or a combination of safety glasses, a covid-style mask, and a baseball cap. Aluminum flakes get everywhere and you want to protect yourself from the chips that fly. Also, take your time and cut slowly, especially if you use a blade with less than 60 teeth. Slow ifs Good !
*** the front and rear crossbars are different lengths !!! - I took my time and did very precise measurements and took one large cut, placed the bars back on the car with the brackets sitting tight up against their final location on one side, and propped up side and its mounting bracket, then measured again for the final cut. When I was done I saved all the pieces, measured the thickness of the saw blade, and determined exactly what I removed from each crossbar. So here's what I took off of each:
removed 89.0mm from the front bar removed 82.7mm from the rear bar
*** It's better to remove too little and have to make another cut. My final cut on the rear bar was half a blade width and both crossbars fit perfect.
*** Once the bars were perfectly cut I placed the bars with their end brackets back on the roof at their exact mounting locations and sight them through their mounting holes on both sides of the car. With the bars sitting snugly in place I broke the last inch off a pencil and used sharp pencil to trace the mounting holes through the two brackets on the ends I trimmed. Then used a center punch to locate the drill bit precisely.
*** I bought four 6mm Nyloc nuts, and four "cut" (split lock washers)
*** I used a smaller pilot bit to more accurately locate the initial hole in the center and then use a bit that was ever-so-slight larger than the I.D. of the split lock washer. This gave me a little slop, but still made sure the lock washer would compress and do its job.
*** I solved the problem of the holding the Nyloc washers in place by creating a 3D printed block that hods the 6mm nuts and the 6mm lock washer in place. This worked great and I just slid them into the aero-shaped crossbar extrusion. Aside from holder the nuts and washers in place, this keeps the nuts from rotating during assemby.
*** The above nut/washer holder is a free download at: https://www.thingiverse.com/thing:4606945 This 3D printed block was perfect. It held the nuts and plit washers in place during assembly and allowed me to use the original screws that came with the Cadillac bar kit and gave me confidence that these screws will never come loose.
*** I also took the time to scribe the "weep" hole that is designed into the mounting bracket and while I was drilling the new 6mm holes, i use the small pilot bit to notch the end of the bars to keep the tiny hole open and free flowing in case there was dirt build up in the future.
*** The Thule Fork Mount rail I used was a "569 Sprint T" style. It was free from a friend. It had to be loaded in before the mounting brackets are attached. The Cadillac solution for the Bolt is the sleekest most aero design. If I used off-the-shelf (no-mod required) Thule kit then the 569 Sprint rail would be removable, but the crossbars would be stacked on the bracket and less aerodynamic. If I want to remove the fork mount rail I can simply un-screw the three cam levers completely and let the three remaining screw studs float in the crossbars, or possibly 3D print a simple bracket that holes them off to one side and provides a smooth cover to close the open channel and keeps them from rattling around while driving. The Thule circuit is another alternative, but the 569 Sprint T was free to me.
This part is also described in the ChevyBolt.Org at this URL:
https://www.chevybolt.org/threads/crossbars-for-premier-trim-roof-rails.5441/page-4#post-396066
I paid $233 with shipping from a known GM parts distributor and was concerned about the accuracy of cutting the rails and the crossbar compatibility with Thule fork mount rails.
After opening the box from GM I verified that the crossbars do in fact need to be cut, and noticed that the four black mounts are each unique and labeled LF, RF, LR, & RR.
I was also concerned that the crossbars themselves might have a mitered cut and would effect how the rack mounted. Fortunately, the end cuts are not mitered in any significant way.
I chose just to take the excess off of one end. The bars are arc'd and curved upward (convex) and taking the extra off one end is not an issue. I used an 80 tooth blade on my $100 Ryobi chop saw and did not find it necessary to clamp them in place for cutting. I've cut aluminum with various chop saws in the past and although they're made for wood, aluminum is fairly safe if you're careful.
*** use either a face shield like that for wood lathe work, or a combination of safety glasses, a covid-style mask, and a baseball cap. Aluminum flakes get everywhere and you want to protect yourself from the chips that fly. Also, take your time and cut slowly, especially if you use a blade with less than 60 teeth. Slow ifs Good !
*** the front and rear crossbars are different lengths !!! - I took my time and did very precise measurements and took one large cut, placed the bars back on the car with the brackets sitting tight up against their final location on one side, and propped up side and its mounting bracket, then measured again for the final cut. When I was done I saved all the pieces, measured the thickness of the saw blade, and determined exactly what I removed from each crossbar. So here's what I took off of each:
removed 89.0mm from the front bar removed 82.7mm from the rear bar
*** It's better to remove too little and have to make another cut. My final cut on the rear bar was half a blade width and both crossbars fit perfect.
*** Once the bars were perfectly cut I placed the bars with their end brackets back on the roof at their exact mounting locations and sight them through their mounting holes on both sides of the car. With the bars sitting snugly in place I broke the last inch off a pencil and used sharp pencil to trace the mounting holes through the two brackets on the ends I trimmed. Then used a center punch to locate the drill bit precisely.
*** I bought four 6mm Nyloc nuts, and four "cut" (split lock washers)
*** I used a smaller pilot bit to more accurately locate the initial hole in the center and then use a bit that was ever-so-slight larger than the I.D. of the split lock washer. This gave me a little slop, but still made sure the lock washer would compress and do its job.
*** I solved the problem of the holding the Nyloc washers in place by creating a 3D printed block that hods the 6mm nuts and the 6mm lock washer in place. This worked great and I just slid them into the aero-shaped crossbar extrusion. Aside from holder the nuts and washers in place, this keeps the nuts from rotating during assemby.
*** The above nut/washer holder is a free download at: https://www.thingiverse.com/thing:4606945 This 3D printed block was perfect. It held the nuts and plit washers in place during assembly and allowed me to use the original screws that came with the Cadillac bar kit and gave me confidence that these screws will never come loose.
*** I also took the time to scribe the "weep" hole that is designed into the mounting bracket and while I was drilling the new 6mm holes, i use the small pilot bit to notch the end of the bars to keep the tiny hole open and free flowing in case there was dirt build up in the future.
*** The Thule Fork Mount rail I used was a "569 Sprint T" style. It was free from a friend. It had to be loaded in before the mounting brackets are attached. The Cadillac solution for the Bolt is the sleekest most aero design. If I used off-the-shelf (no-mod required) Thule kit then the 569 Sprint rail would be removable, but the crossbars would be stacked on the bracket and less aerodynamic. If I want to remove the fork mount rail I can simply un-screw the three cam levers completely and let the three remaining screw studs float in the crossbars, or possibly 3D print a simple bracket that holes them off to one side and provides a smooth cover to close the open channel and keeps them from rattling around while driving. The Thule circuit is another alternative, but the 569 Sprint T was free to me.
Similar models
thingiverse
free
Duplicator i3 y-axis NEMA motor mount by GreyDay
...lt).
loosen the right guide rail.
bolt the motor to the mount (i used m3x35 and m3x10 and washer).
reattach the right guide rail.
thingiverse
free
Motorcycle Stand - Clean chain by andreribeiroeco
...ly and place the stand under the wheel ... end.
obs. i am brazilian and my native language is not english, sorry for any mistake.
thingiverse
free
Light bracket by xianic
...
the lighting bar is available from hobbytronics (uk), and sparkfun (us). the image of the lighting bar was provided by sparkfun.
thingiverse
free
2019+ Rav4 Roof Rack Pylons by Scubanero
... vendors on ebay. if you use different bars, double check the length as you don't want to bottom the bolts against the roof.
thingiverse
free
Projector tilting mount by mrgizmo9999
...ector can mount with either a ram mount style, or with a snap on square bar adapter, or with an end cap for a 1" square bar.
thingiverse
free
Drill Press Guard Bracket
... clips which lock it in place are a separate thing since they need to be printed at a higher quality - especially if pla is used.
thingiverse
free
Hullavator Mounting Fix by chuggs
...finelty going to be the last attachment in the design chain to fail... way more robust than the stock thule slot nuts and bolts.
thingiverse
free
Golf 7 wagon roof rack adapter by Adonay944
... attach a m6x60mm bolt to secure the bar to the mount . however due to the design with a cutout in the mount, it is self locking.
thingiverse
free
bike lock bracket under saddle
...of the bracket. the bracket is suitable for locks similar to the one shown in the pictures. to mount...
thingiverse
free
Bike mount for Thule Charriot Crossbar by crasu
...ot trailer. use at your own risk.
needs the following screws to assembe:
2 m5 screw
4 m4 screw
4 m4 nuts
2 m5 din 557 square nut
Elhalpern
thingiverse
free
U.S. Nickel Screw Driver for Sewing Machine Thread Plates by elhalpern
...e slot of the screw.
this tool also allows for more torque when removing or installing screws intended to be managed with a coin.
thingiverse
free
Holder for "Tube cutter hand tool trapezoid blade" by PredatorJr by elhalpern
...d a holder that protects fingers and the blade without changing the set of the filament. just a rubber band to hold it in place.
thingiverse
free
Ciclop 3D Scanner Adjustable Laser Mount by elhalpern
... the dimensional sketch is courtesy of bq and the laser alignment images come from https://maquinaslibres.noblogs.org/tag/ciclop/
thingiverse
free
Curved illuminator for Ciclop 3D Scanner by elhalpern
...clop, or just chalk it up to a educational toy??
please write back if you have advice on combining meshes using free software....
thingiverse
free
Accessory Container for "USB Bore Scope Holder" by elhalpern
...ot zip tie using vinyl electrical tape. this gives me good aiming control when i drop the camera into walls and the like.
enjoy!
thingiverse
free
Front Bumper License Plate Cap Inserts CRV Honda 2004 by elhalpern
...igger problems.
you might want to scale these down by 1% or 2% for a better fit... depending on the material and printer you use.
thingiverse
free
Engine Key Tecumseh 430492 35062 for Yard Machines 24inch Snow Blower by elhalpern
...rn
thingiverse
replacement key for a yard machines 24" snow blower with a 7hp tecumseh engine key number 430492 or 35062
thingiverse
free
Optiplex 160 Stand by elhalpern
...pture slots and grabs the pc more than an inch up its sides. it's a free alternative to dell's # cn-0j163g - j163g
enjoy!
thingiverse
free
1/8" mini phone splice shell by elhalpern
...n the three channels and filling it with epoxy i use a small spring loaded clamp to hold it tightly closed while the epoxy cures.
Crossbar
archive3d
free
Barbell 3D Model
...barbell 3d model archive3d barbell bar weight crossbar barbell - 3d model (*.gsm+*.3ds) for interior 3d...
archive3d
free
Barbell 3D Model
...barbell 3d model archive3d barbell bar weight crossbar barbell rogue n230316 - 3d model (*.gsm+*.3ds) for interior...
3ddd
$1
Потолочный светильник Crossbar
...crossbar
потолочный светильник crossbar
высота (см): 100
длина (см): 88
cтек не свернут
в архиве имеется файл fbx и max_2012
archibase_planet
free
Barbell
...barbell archibase planet barbell bar weight crossbar barbell rogue n230316 - 3d model (*.gsm+*.3ds) for interior...
3d_export
$10
Angelucci Crossbar table D970 3D Model
...e corona max
angelucci crossbar table d970 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl sgirenko 102119 3dexport
3d_export
$5
Swedish wall 3D Model
...swedish wall 3d model 3dexport swedish wall horizontal bar crossbar турник шведская стенка barra fija barras de pared reck...
3d_export
$5
wardrobe brimnes
...wardrobe with mirror. inside there are shelves and a crossbar for hangers. material: wood, aluminum, glass. dimensions: width: 117...
turbosquid
$15
Barstol Crossbar bar stool
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
Ceiling hook for crossbar by tolucophoto
...ort cross bar.
print a pair.
i designed it to hold my green screen background from the ceiling so there's no need for stands.
Cadillac
3d_export
$99
Cadillac Fleetwood 75 Station Wagon 1959 3D Model
...on avant kombi combi cadillac 50s touring sw 1959 caddy 59
cadillac fleetwood 75 station wagon 1959 3d model squir 64500 3dexport
3d_ocean
$18
Cadillac Escalade esv 2wd1 rim
...el has got physically accurate materials. it is separated on parts and they are correctly named. so it is easy to use and modi...
3d_ocean
$18
Cadillac Escalade awd 2012 rim
...el has got physically accurate materials. it is separated on parts and they are correctly named. so it is easy to use and modi...
3d_export
$25
Cadillac 1910 model 30 3D Model
...cadillac 1910 car old
cadillac 1910 model 30 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl denis2 113173 3dexport
3ddd
$1
Cadillac
...cadillac
3ddd
капитоне
диван в стиле автомобиля cadillac eldorado
cg_studio
$129
Cadillac Escalade Crawler3d model
...si .mb .max .lwo .fbx .c4d - cadillac escalade crawler 3d model, royalty free license available, instant download after purchase.
3d_ocean
$89
Cadillac BLS sedan 2009
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
3ddd
$1
Cadillac Escalade wheel
... escalade , колесо
колесо cadillac escalade 2014
3d_ocean
$59
1959 Cadillac Eldorado Biarritz
...with a highly detailed interior. the model comes in four formats: -.blend, rendered with cycles, as seen in the images; -.obj,...
3d_ocean
$89
Cadillac ELR 2014
...ay) - *.fbx (multi format) - *.obj (multi format) - *.3ds (multi format) - *.mb (maya 8.5) - *.lwo (lightwave 6) - *.c4d (cine...
Premier
3ddd
$1
Neverending Glory
...czech republic’s estates theater in prague, where the world premier of don giovanni rang out under the leadership of...
3d_ocean
$85
Ferrari 488 Spider 2016
...introduced the 488 spider, scheduled to make its official premier during the frankfurt motor show this september. the italian...
3d_ocean
$19
Low Poly Cinema
...movie theatre have: one cinema/film/movie house/movie theatre that have premier posters, flower beds and flower pots, wall mounted air...
3ddd
$1
Кровать Stilema "Le Premiere Classe"
...dd
stilema
итальянская кровать в классическом стиле.
фирма: stilema
модель: le premiere classe
сетка: квадраты
полигонов: 404 157
3ddd
$1
мебель для руководитель Премьер
...мебель для руководитель премьер 3ddd мебель для руководитель премьерhttp://www.unitex.ru/cabinets/premierst.phtml ...
3d_ocean
$9
Premier League Trophy
...ue model premier silver soccer trophy uefa winner
the english premier league trophy 3d model with animation create with cinema 4d
3d_ocean
$8
Nike Ordem 2 Official Match Ball
...3docean ball football la liga league nike official ordem premier serie a soccer updated! nike ordem 2 soccer ball...
3d_ocean
$89
Opel Meriva 2011
...versatile and elegant: the second generation opel meriva, to premier at the 2010 geneva motor show, will set the...
3d_ocean
$89
Volkswagen Tiguan
...volkswagen is showing the new tiguan in a world premier at the international motor show (iaa) in frankfurt. this...
3d_ocean
$89
Volkswagen Sharan
...families all over europe. coming now, after a world premier at the 2010 geneva international motor show, is a...
Chevy
3d_export
$99
Chevrolet El Camino 1959 3D Model
...1959 3d model 3dexport chevrolet el camino 1959 1960 chevy 2-door coupe classic vintage utility pickup us american chevrolet...
3d_export
$99
Chevrolet Cruze hatchback 2012 3D Model
...2014 hatchback sport city urban style us doors auto chevy compact family chevrolet cruze hatchback 2012 3d model humster3d...
3d_export
$50
Chevrolet Corvette 2005 3D Model
...chevrolet corvette 2005 3d model 3dexport car vehicle chevy corvette sportscar transportation chevrolet corvette 2005 3d model digimation...
3d_export
$15
American Racing Classic 200S 16 inch Rim 3D Model
...steel rally 16 inch style muscle 60s stylish oldsmobile chevy american racing classic 200s 16 inch rim 3d model...
3d_export
$119
Chevrolet Bel Air Convertible 1955 3D Model
...chevrolet bel air convertible 1955 3d model 3dexport chevrolet chevy bel air belair 1955 1956 convertible cabrio roadster 50s...
3d_ocean
$89
Chevrolet Captiva LTZ 2013
...ltz 2013 3docean 2011-2015 5-door captiva chevrolet chevrolet captiva chevy crossover ltz suv us the 3d model was created...
3d_export
$129
Chevrolet Camaro SS Convertible 2016 3D Model
...2015 2016 convertible cabrio roadster sport fast chevrolet camaro chevy ss interior cabriolet 2017 movie rs chevrolet camaro ss...
3d_export
$5
Tires and wheels 3D Model
...wheels axles rims rim car truck ford dodge suv chevy boggers swampers baja tires and wheels 3d model download...
3d_export
$129
Chevrolet Camaro 2016 3D Model
...v8 usa 2015 2016 sport coupe fast chevrolet camaro chevy ss interior 2017 movie rs 2018 2019 transformers chevrolet...
cg_studio
$129
Chevrolet Bolt EV 20173d model
...car american usa 2015 2016 ecologic electric ev chevrolet chevy 2017 vechicle facelifting green blue 2018 2019 2020 volt...
Retainer
3ddd
$1
The Herald Armchair by Versace
...e foam.
available in the fabrics and leather from the collection
armchair dimensions:
height 69 cm x width 74 cm x depth 70 cm
3ddd
$1
ocean rocker by jolyon Yates
...cker by jolyon yates
3dsmax , vray obj file included
the mesh retains all the original uvs, allowing for fast material creation.
3ddd
$1
ENGLISH WINDSOR
...ed silhouette and spindle back of the original, yet features more generous proportions and the comfort of a waterfall-edged seat.
3ddd
$1
Armchair Fensy by NUBE
...l metal frame covered by shape retaining polyurethane foam. black oven painted or black nichel painted feet.
not removable cover.
3d_ocean
$6
Photorealistic High-Poly/Res Bullet
...games or hd videos. this bullet is a copy of the original. all dimensions were retained. the file includes: vray materials rea...
3ddd
$1
Sanderson Pillows Oakwood
... that has been beautifully translated in five colourways to retain the characteristic textures and flecks of the original prints.
3ddd
$1
Classic Spoon Plate Tableware
...tains all the original uvs ).
see more images here:https://www.behance.net/gallery/29507881/3d-model-classic-tableware
3ddd
$1
GLASS BARN FILAMENT SCONCE AGED STEEL
...s retain the classic lines and exposed hardware of the originals. designed to showcase the warmth of edison-style filament bulbs.
3d_ocean
$16
Sony Ericsson Xperia S
...y textures, bump maps, opacity maps. custom screen texture, low poly retained so smoothness can be adjusted according to demands.
3d_export
$5
car homer simpson 3d blender rigged
...ou will find this 3d formats><br>-blender file : is the native file. -obj(.obj) -fbx(.fbx) -alembic(.abc) -collada(.dae)
Washer
3d_export
$50
Library Screws Bolts DIN 912 ISO 4762 AutoCAD 2010 3D Model
...912 iso 4762 bolt bolts screws nuts nut screw washer lock grover hardware fasteners anchors anchor library screws bolts...
3d_export
$30
Washer 3D Model
...ng machine laundry appliance maya mental ray clothing clothes bathroom fagor spanish kitchen
washer 3d model jdamg 53274 3dexport
archive3d
free
Washing machine 3D Model
...model archive3d washing machine siemens front-loading washing machine laundry washer washing machine siemens wm12a162dn n250616 - 3d model (*.gsm+*.3ds)...
3ddd
$1
BUFFALO AIR HOCKEY 7FT HURRICANE II
...obj, fbx, 3ds air hockey, glow hockey, table, slide, washer screen, new, воздушний хокей, стол, слайдер, экран, шайба superb...
3ddd
$1
washer
...washer
3ddd
стиральная машинка
http://www.foxtrot.com.ua/ru/shop/stiralki_lg.html
3ddd
$1
Siemens WT44E102DN washer
...siemens wt44e102dn washer
3ddd
сушилка , siemens
siemens wt44e102dn washer
3d_ocean
$5
Drum Washing Machine
...closeup drum dryer electronic inside interior kitchen laundry machine washer washing 3d model of drum washing machine > 3ds...
3d_ocean
$6
Laundry Basket Glass Metal Piece
...chrome clean clothes furniture glass hygiene laundry metal wash washer washing wheels a highly detailed laundry basket, good for...
3d_ocean
$25
Nuts, Bolts, Screws, Misc.
...crank fastener floater gauges greeble nail nut rivet screw washer greeble – a greeble or nurnie is a small...
3d_ocean
$20
Beko washing machine
...beko washing machine 3docean appliance bathroom beko machine washer washing washing machine wmb61241 highly detailed model of the...
Kit
3d_ocean
$5
Streets and highways construction kit
...make city streets. roads has the pavement. models low poly and ready to use in games. texture size in render images 2048×2048,...
3d_ocean
$29
Proto Cemetery Set
...they are meant to be used as a construction kit for rapid game prototyping. the blocks are real world...
3d_export
$12
Grapes Single Fruit Bunches and Model Kit 3D Model
...
grapes single fruit bunches and model kit 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl martin3d 108952 3dexport
3d_export
$15
Drum Stand 3D Model
...holder snare rim hardware modern orchestra music band drumkit kit rack drum stand 3d model download .c4d .max .obj...
3d_export
$10
Wizard kit 3D Model
...at broom glasses spell globe
wizard kit 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl emadnabil27 109521 3dexport
3d_ocean
$35
Prototyper Desert Set
...they are meant to be used as a construction kit for rapid game prototyping. the blocks are real world...
3ddd
$1
Nomades Authentic Ceilin Lights
...decorative porcelain, glass or wooden elements - an electrification kit khaki, black or transparent, according tot the models -...
archive3d
free
Drum 3D Model
...drum 3d model archive3d drum musical instrument tambour drum kit drum conga n310116 - 3d model (*.gsm+*.3ds) for interior...
cg_studio
$30
Scifi Interior Construction Kit (Basic)3d model
...bx .dae .3ds - scifi interior construction kit (basic) 3d model, royalty free license available, instant download after purchase.
cg_studio
$25
Stockade construction kit3d model
...ds .obj .mb .max .fbx .c4d - stockade construction kit 3d model, royalty free license available, instant download after purchase.
Nut
3d_export
$15
Ratchet Socket Wrench 3D Model
...socket wrench fastener tools equipment hand tool ratcheting bolt nut torque tighten spanner screw extension hex assemble mechanic craftsman...
3d_export
$50
Library Screws Bolts DIN 912 ISO 4762 AutoCAD 2010 3D Model
...3dexport din 912 iso 4762 bolt bolts screws nuts nut screw washers lock grover hardware fasteners anchors anchor library...
3ddd
$1
Mooi Nut Lounge Chair
...босмотч не колапснут).
вы имеете возможность самостоятельно выставит качество сглаживания геометрии.
все uv развертки в порядке
3d_ocean
$9
Nut & Bolt Cameraman Figure
...nut & bolt cameraman figure
3docean
all the pieces come as a separated object so you can add texture and/or animation.
3d_export
$30
Cognac sigar Set 3D Model
...almonds carafe bottle zhitkost whiskey glass chain cigarettes tobacco nut brandy acohol cognac sigar set 3d model download .c4d...
3ddd
$1
Ralph Louren Ayers Skull Collection
...- ayers trinket box. - ayers skull & bones nut bowl. - ayers skull & bones nut bowl with...
3ddd
$1
Умывальник "Nut"
...vertices - 211 000
formats: 3dsmax 2011, obj, fbx
renderer: corona renderer and v-ray
materials: all textures in english included
3d_ocean
$13
Blackpool T Table by Satelliet
...table by satelliet 3docean blackpool grey industrial levers metal nut original rods rough rusty satelliet stretcher table threads unique...
3d_ocean
$4
Hazelnut kernel
...v-ray adv 2.40.03 - polygonal mesh - inluded obj file for any 3d-software - textures 4096×4096 pixels. diffuse, displace and bump
3d_ocean
$16
Mechanic's Workbench
...mechanic's workbench 3docean bench bolts garage gripe jaw mechanic nut rough table tool vise wood wooden woodworking work workbench...
Bolt
3d_export
$15
Ratchet Socket Wrench 3D Model
...ratchet socket wrench fastener tools equipment hand tool ratcheting bolt nut torque tighten spanner screw extension hex assemble mechanic...
3d_export
$10
Swing Bolts DIN 444 M8 AutoCAD 2007 2010 3D Model
...l bolts lifting 9037fastener machine stainless eyebolts
swing bolts din 444 m8 autocad 2007 2010 3d model kapuravv 30806 3dexport
3d_export
$50
Library Screws Bolts DIN 912 ISO 4762 AutoCAD 2010 3D Model
...lock grover hardware fasteners anchors anchor
library screws bolts din 912 iso 4762 autocad 2010 3d model kapuravv 30832 3dexport
3ddd
$1
Bolt Down Snow Fence
...bolt down snow fence
3ddd
снегозадержатель
a simple snow fence model to add realism in your exterior scenes.
3d_ocean
$9
Nut & Bolt Cameraman Figure
...nut & bolt cameraman figure
3docean
all the pieces come as a separated object so you can add texture and/or animation.
3d_ocean
$9
Oil rig oaklay eyewear
...3d of oil rig oaklay eyewear,detailed with all parts: handles,glass,bolt, all details with realistic materials *.3ds *.obj *.fbx...
3d_ocean
$1
Seamless Hand Painted Rusty Scale Mail Armour 2
...armour 2 3docean antic antique armor armour asset basic bolt dead undead fantasy forgotten game gaming greek hand industry...
cg_studio
$129
Chevrolet Bolt EV 20173d model
....obj .max .lwo .fbx .c4d .3ds - chevrolet bolt ev 2017 3d model, royalty free license available, instant download after purchase.
3ddd
$1
Furniture Factory Cart
...may have nicks and imperfections original cast iron wheels, bolt and plates end wheels rotate to keep cart stationary...
3d_ocean
$16
Mechanic's Workbench
...mechanic's workbench 3docean bench bolt garage gripe jaw mechanic nuts rough table tool vise...
Modified
3ddd
$1
cowskin
... from the modifier's settings and you can add the modifier yourself. if you use the max file the modifier stack is unchanged.
3d_ocean
$12
Computer mouse
...odel. uw texture added. if need low poly, you can turn off smooth modifier. created in 3dsmax 2016 and there is 3dsmax 2014 copy.
3d_ocean
$25
Mopar Dodge Challenger wheel
... has got physically accurate materials. it is separated on parts and they are correctly named. so it is easy to use and modify...
3d_ocean
$18
Chevrolet Tahoe 2008 rim
... got physically accurate materials. it is separated on parts and they are correctly named. so it is easy to use and modify the...
3d_ocean
$6
3D Bear Bottle
...xture in bottle label & cap from .psd file. hdri environment texture. you can change bottle color. buy it and save your time.
3d_ocean
$7
Sunbed 06
...or poolside, beach vs. turbo smooth modifier not deteted. creating in 3ds max 2014 and vray 2.4 *.obj, *.3ds, *.fbx model include
3d_ocean
$15
Modern Sofa
...ic sizes (centimeters) and proportions. all objects have quad-polygon geometry so you can apply another turbosmooth modifier a...
3d_ocean
$25
Acura RLX Sport Hybrid wheel
... has got physically accurate materials. it is separated on parts and they are correctly named. so it is easy to use and modify...
3d_ocean
$25
Nissan Cabstar wheel
... physically accurate materials. it is separated on parts and they are correctly named. so it is easy to use and modify the mod...
3d_ocean
$18
Dodge Vin Diesel Car rim
... got physically accurate materials. it is separated on parts and they are correctly named. so it is easy to use and modify the...