Lavochkin La-11 RC Plane

Last crawled date: 4 years, 4 months ago

Fully printable 3D rc airplane Lavochkin La-11.
*** Lavochkin La-11 ***
Wingspan : 760mm
Takeoff weight : ~720g
Battery : 3S 800 - 1800mAh
Motor : 2830-1100kv
Propeller : 10x6
Flight time : > 10min (1800mAh), 8min (1000mAh)
COG : 70mm from front of wing part (exactly on main longeron)
Content:
/fuselage - Fuselage parts
/wing - Wing parts
/controls - Control surfaces
/motor - Motor frame
/source - Project for FreeCAD
Recommended printer settings:
Layer height: 0.25mm
Nozzle : 0.4 - 0.5mm
Filament : PETG / PLA
Assembly recommendations:
Put receiver into battery tray.
Glue wing to fuselage, you really not need to remove wing for all lifetime.
Elevator lift should be 8-12mm by tail edge, not more, trust me.
If you have troubles with aft positioned COG, you may install spinner
Drill hole in motor frame for upper screw.
You may want to add a piece of tape on cover lock for better locking.
Flight recommendations:
Keep air speed! Low speed = spin stall = death :)
Keep away from sharp maneuvers using elevator, fly smooth.
Other:
You may upscale and print this model. Upscaled fly much much better.
On photo you may find original 760mm and upscaled to 920mm versions. 920mm version equipped with 3536-1200kv motor and 9x6 APC-style prop. On upscaled version you can fly with sharp maneuvers. Normal takeoff weight for 920mm version is about 1050g.
PS:
This is my first design. I started to desing new one in another CAD and with 1.4m wingspan, so I think that no updates will come for this model, if you want, you may do it yourself, and please let me know :)
Update: 20.01.2020
New fuselage_02.stl
New FreeCAD project with fixed fuselage_02
Update 23.01.2020
Printed parts weight added (PLA / 0.5)
Assembly manual coming soon...
Update 27.01.2020
Assembly manual added