K40 Laser Ring Mount by TheMoDFatheR

Last crawled date: 3 years, 4 months ago

This is a ring mount for the Chinese K40 style lasers. It sets atop and around the laser head and is secured with a latch. There are no screws in this design, so no trips to the hardware store.
There are three ball joint recivers mounted to the ring for attaching fans, lasers, etc.
My setup calls for a 40mm fan for air assist, so I included my funnel design to those specs. I also have a laser attachment, also included.
The "mini top" is made to be small yet sturdy and the included clip should fit across it and latch to the bottom of the metal print head plate. There are holes recessed into the bottom to cover and avoid the factory screwheads so that the mount sets flat on the plate.
The rear post is for mounting a drag chain. The goal was to have a mount with no store bought fasteners and no need to disassemble any part of the laser head in order to mount accessories.
I have also included the ball joint linkage as well as a female to female joint link.
I will upload photos later, I'm on to another project at the moment.
Cheers