Thingiverse
Honda CRF 250RL to Givi tankbag adaptor by Jarpur
by Thingiverse
Last crawled date: 3 years, 1 month ago
There was no adaptor for Honda CRF 250 Rally for a GIVI tank bag (the handlebars are too close to the filler cap where the adaptor would bolt on to the bike for regular GIVI parts to fit) so I decided to make one.
In the end I made 7 versions.
First 2 versions that move the GIVI mounting ring roughly 35mm back and up from standard mounting position of the fuel filler cap.
Then, since my bike has aftermarket handlebars that are taller than stock I made another version that move the GIVI mounting ring roughly 50mm back and up from standard mounting position.
Then I made 3 files with the top tilted 15 degrees backwards, one for each of the 35 and 50, plus one 35 with patterned space for different look.
The "standard" files are for regular tankbags which have the mounting positioning cutout on the back. The "Afr Twin" are for Honda African Twin (the CRF 250 big brother) specific tankbag and have the mounting positioning cutout on the right side (regular tankbags would fit, they'll just be rotated 90 degrees counterclockwise).
I do call it version 1, but this is very much a work in progress.
I only managed to print the "Givi Honda Tankbag Mount Afr Twin 35back 35up V1". Almost. My printer broke 99,7% through the 13 hour print and I'm currently waiting for a spare part.
My test print was sliced in Cura with 1.6mm walls and 20% infill. Printed in PLA. It is strong enough for me to stand on it and very stiff no flexibility at all so my worries of this material/technology being too weak to be useful seem unfounded.
As always, printer, slicer and material used can affect your results.
This will also fit on some other Hondas that use the same bolt pattern on the fuel filler cap.
In the end I made 7 versions.
First 2 versions that move the GIVI mounting ring roughly 35mm back and up from standard mounting position of the fuel filler cap.
Then, since my bike has aftermarket handlebars that are taller than stock I made another version that move the GIVI mounting ring roughly 50mm back and up from standard mounting position.
Then I made 3 files with the top tilted 15 degrees backwards, one for each of the 35 and 50, plus one 35 with patterned space for different look.
The "standard" files are for regular tankbags which have the mounting positioning cutout on the back. The "Afr Twin" are for Honda African Twin (the CRF 250 big brother) specific tankbag and have the mounting positioning cutout on the right side (regular tankbags would fit, they'll just be rotated 90 degrees counterclockwise).
I do call it version 1, but this is very much a work in progress.
I only managed to print the "Givi Honda Tankbag Mount Afr Twin 35back 35up V1". Almost. My printer broke 99,7% through the 13 hour print and I'm currently waiting for a spare part.
My test print was sliced in Cura with 1.6mm walls and 20% infill. Printed in PLA. It is strong enough for me to stand on it and very stiff no flexibility at all so my worries of this material/technology being too weak to be useful seem unfounded.
As always, printer, slicer and material used can affect your results.
This will also fit on some other Hondas that use the same bolt pattern on the fuel filler cap.
Similar models
thingiverse
free
Thickness for Givi "tanklock" system by mc0676
...or my africa twin.
i had to rotate of 90° the hook and i need to print a thickness of 14 mm to avoid contact with the handlebars.
thingiverse
free
Thickness for Givi "tanklock" system (v2) by mc0676
...or my africa twin.
i had to rotate of 90° the hook and i need to print a thickness of 14 mm to avoid contact with the handlebars.
3dwarehouse
free
HONDA My CRF 250 RALLY by My Bike
...honda my crf 250 rally by my bike
3dwarehouse
honda my crf 250 rally by my bike
thingiverse
free
CRF 250R Fork Hose Clamp by Dylan619style
...se clamp by dylan619style
thingiverse
reversed engineered my bikes clamp. should fit 04-09 honda crf 250's but not positive.
grabcad
free
HONDA CRF FRAME STICKERS
...stickers
grabcad
honda crf frame stickers protectors.
this item fits on
honda crf r 250 2014 - 2017
honda crf r 450 2013 - 2016
thingiverse
free
Motorbike smartphone support adaptor by MOSFET_burnt
..., and a regular nut.
nuts and screws can be fitted using a soldering iron and tighten them up with a screw or nut, respectively.
grabcad
free
Honda CRF 250_Swingarm_ 2014
...honda crf 250_swingarm_ 2014
grabcad
honda crf 250 swingarm updated
thingiverse
free
Fuel Filler Pump Cradle by Shadespool
...dised bottle cap.
cap diameter 44mm.
cap neck depth 22mm.
designed to fit a "prolux" hand fuel pump but may fit others.
grabcad
free
honda crf 250 chain guide plate
...honda crf 250 chain guide plate
grabcad
it works on my honda crf250x 2007
grabcad
free
swingarm Honda CRF 250
...swingarm honda crf 250
grabcad
honda crf work in progress
solidwork frame and body
Jarpur
thingiverse
free
Dilligaf Focus Fishmo Dice 20mm Kevin Wilson by Jarpur
... the phrases dilligaf, focus and fishmo. each word is twice, making this in effect a three sided dice. the dice is a 20x20x20 mm.
thingiverse
free
CD DVD Box by Jarpur
...edit. added optional bottom extension that will slot onto the box beneath. this makes the boxes more stable if you stack them up.
Tankbag
thingiverse
free
TillyTec Lampsack Protection by BlutVampir
...you dont mount the handle. in this case, the tankbag can be damaged as the ends are very sharp....
thingiverse
free
Motorcycle change dispenser (quarters only) by GeneCash
...want to slip it out of view into a tankbag while you shop. make sure you use nyloc lock...
thingiverse
free
SW Motech tankbag BMW S1000XR 2020 top case mount by jtrueman84
...e split body needs to be rotated correctly. the print does not require supports as the upside-up holes are modified for bridging.
Givi
thingiverse
free
Cable Holder for GIVI Phone Support Yamaha Tracer 900 by TheSimogames
...de this model to make a cable management for my phone support on my tracer 900.
to keep it in order and to not risk to losing it.
thingiverse
free
Wedge support for motorbike trunk - more space for passenger by fimek
...it is equipped with the mounting mechanism similar to givi "mono-key". however, a support to mount the trunk (the...
thingiverse
free
GIVI Phone/Satnav handlebar support extension by Conti93
...ivi phone/satnav handlebar support.
used on a r 1150 gs in order to achieve correct mounting angle and optimal screen visibility.
thingiverse
free
gancio rete per bauletto GIVI by 1mp3r4t0r
...rk52n
stampato in z-ultrat
con infill al 20% e layer 0.19
hook for motorcycle case
they allow to mount a net under the top cover
thingiverse
free
Thickness for Givi "tanklock" system (v2) by mc0676
...or my africa twin.
i had to rotate of 90° the hook and i need to print a thickness of 14 mm to avoid contact with the handlebars.
thingiverse
free
Givi frame cap by rb1205
...ile to be able to mount it, expecially the letter holes need to be enlarged.
to fix the print on place i used some silicone glue.
thingiverse
free
KAPPA 28L OR GIVI Z315 PUSH BUTTON FOR TOP CASE by zaxos
...kappa 28l or givi z315 push button for top case by zaxos
thingiverse
its a push button for moto top case
thingiverse
free
soporte de cerradura baul ducati by franhabas
...thingiverse base para cerradura de baul de moto ducati (givi ...
thingiverse
free
Side Stand Extension V-Strom 1000 (14-16) - UNTESTED by MilanGajic
...by milangajic thingiverse side stand extension based on a givi one. intended for a suzuki v-strom dl1000 14-16 model....
Crf
3d_export
$59
Cross Honda crf 450 r 3D Model
...cross honda crf 450 r 3d model
3dexport
honda cross moto
cross honda crf 450 r 3d model trea 57579 3dexport
3d_export
$10
Mini Refrigerator CRF-TD168BDS
...painter available for all software<br>ue4. ue5. blender. maya. 3d max. unity. c4d.<br>formats: .obj .gltf .fbx .blend
turbosquid
$6
motorbike crf model
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
Motocross piston Compressor 250cc 77mm by richcoad89
...worked fine. this has the hinda motorcycles logo and crf logo embossed on the...
thingiverse
free
USB Connector for AfricaTwin 1000 ADVENTURE 18-19 by ThePes76
...usb aggiuntiva da fissare al cockpit di africa twin crf 1000 l. adatta per ospitare un connettore standard rotondo....
thingiverse
free
honda 450 crf - sprocket cover - carter, cache de pignon by D3DP_SamuelMazuy
...honda 450 crf
carter/cache pignon pour honda 450 crf
the photo comes from a supermoto motorcycle, the part fits perfectly
enjoy !
thingiverse
free
Motocross HONDA CRF Number plate key chain by Neto23
...motocross honda crf number plate key chain by neto23
thingiverse
honda crf number plate key chain.
thingiverse
free
Honda CRF 250R Rear shock lower bearing bushing by eddymeister2k
... in autocad and print with 100% infill and abs+. don't forget to do support.
it fits into honda crf250r 2009.
hope you enjoy!
thingiverse
free
Dirtbike Clutch Basket Holder by KSlezak
...inner and outer clutch basket on a honda 2007 crf 250r dirtbike. the purpose is to prevent the inner...
Adaptor
3ddd
$1
Giorgetti Tycoon Desk
...in saddle leather. the top is equipped with two adaptor, placed on the left and on the right, each...
3ddd
$1
Giorgetti Tycoon Desk
...in saddle leather. the top is equipped with two adaptor, placed on the left and on the right, each...
3d_ocean
$5
Powerbank
...powerbank 3docean adaptor charger phone power powerbank powerbank phone charger. models: downloadable...
3d_export
$10
Samsung Travel Adapter 3D Model
...samsung travel adapter 3d model 3dexport charger white travel adaptor battery charging device samsung travel adapter 3d model g.lex...
3d_export
$5
male union tee adaptor
...ame is male union tee adaptor , it is used in home and industrial area . if you want to get yhis parts blue print buy it from me
3d_export
$5
logitech g27-g29 quick release
...connector for the g27/g29 adaptor and the other wheel adaptor<br>files are in stl format, but if you want to...
3d_export
free
Dragon Ak47
...devices such as a muzzle brake or a blank-firing adaptor ...
turbosquid
free
Adaptor plug
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$18
Memory stick adaptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Adaptor-2
...alty free 3d model adaptor-2model for download as dwg and ige on turbosquid: 3d models for games, architecture, videos. (1710809)
Honda
3d_export
$99
Honda CRV 2012 3D Model
...odel
3dexport
honda crv cr-v usa japan suv offroad 4x4 2011 2012 2013 2014 2015 2016
honda crv 2012 3d model squir 50757 3dexport
3d_export
$99
Honda Insight Hybrid 2012 3D Model
...012 2013 2014 hatchback hybrid japan combi kombi sw station wagon eco usa
honda insight hybrid 2012 3d model squir 50465 3dexport
3d_ocean
$25
Honda Legend wheel 2015
...got physically accurate materials. it is separated on parts and they are correctly named. so it is easy to use and modify the ...
3d_export
$95
Honda Civic LX 2016 3D Model
...als realistic v-ray
honda civic lx 2016 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl fisherman3d 107211 3dexport
3d_ocean
$25
Honda NSX wheel 2015
... physically accurate materials. it is separated on parts and they are correctly named. so it is easy to use and modify the mod...
cg_studio
$129
Honda NSX 2016 Safety Car3d model
...o .fbx .c4d .3ds .obj .xsi - honda nsx 2016 safety car 3d model, royalty free license available, instant download after purchase.
cg_studio
$129
Honda NSX 20163d model
...mb .max .lwo .fbx .c4d .3ds .obj .xsi - honda nsx 2016 3d model, royalty free license available, instant download after purchase.
cg_studio
$145
Acura NSX 20163d model
...acura nsx 20163d model cgstudio acura honda nsx 2015 2016 201 2018 hybrid sports car japanese...
3d_export
$7
Spoon SW388 3D Model
...spoon sw388 3d model 3dexport spoon honda civic sw388 regmasters evo rims wheels spoon sw388 3d...
archive3d
free
Car 3D Model
...car 3d model archive3d motor-car car automobile car honda fit 2008 n121010 - 3d model (*.3ds) for exterior...