Thingiverse
Gardena Schlauchhalter für Schlauchwagen, hose trolley clip by brinkmann
by Thingiverse
Last crawled date: 3 years, 1 month ago
Clip for Gardena 1/2" & 3/4" hose couplings. Mounting on the handlebar (diameter 20 and 22mm) ensures that the nozzle does not fall down. Screws M6x20 DIN912. The 3/4"-version uses 6x25.
Ich habe mich bisher immer darüber geärgert, dass die Pistole auf dem Boden fällt und beim Fahren des Schlauchwagens auf dem Boden schleift. Mit dieser Halterung ist dieses Problem gelöst. Infill sollte je nach Anzugsmoment der 2 Schrauben 40-60% sein.
I have always been annoyed that the nozzle falls on the ground and dragging on the ground while driving the hose trolley. With this bracket, the problem is solved. Depending on the tightening torque of the 2 screws, infill should be 40-60%.
I added a 3/4"-version, which fits on 22mm handlebars.
Ich habe mich bisher immer darüber geärgert, dass die Pistole auf dem Boden fällt und beim Fahren des Schlauchwagens auf dem Boden schleift. Mit dieser Halterung ist dieses Problem gelöst. Infill sollte je nach Anzugsmoment der 2 Schrauben 40-60% sein.
I have always been annoyed that the nozzle falls on the ground and dragging on the ground while driving the hose trolley. With this bracket, the problem is solved. Depending on the tightening torque of the 2 screws, infill should be 40-60%.
I added a 3/4"-version, which fits on 22mm handlebars.
Similar models
thingiverse
free
Aerator 1/2" / Luftsprudler by geri1403
... perimeters
3.) height 17.6 - top: 0,1mm layer (for the thread), 2 perimeters, 8 top layers
screw it on a gardena hose connector.
thingiverse
free
3, 5 and 8 mm nozzle for a Gardena hose (1/2") by Schwabi
... nozzle for a gardena hose (1/2") by schwabi
thingiverse
this is a simple nozzle for a 1/2" gardena (or watever) hose.
thingiverse
free
Garden Hose Nozzle Wallmount - fits Gardena by caesar_1111
...ay around in the dirt.
it fits for gardena and most of the know offs and can be attached to any flat surface with up to 4 screws.
grabcad
free
Gardena coupling 3/4"
...gardena coupling 3/4"
grabcad
connection for gardena water hose. tested and tight :-)
thingiverse
free
3/4" Hose Clip w/ 90° Screw Mount by mikers
...se clip w/ 90° screw mount by mikers
thingiverse
3/4" hose clip w/ 90° screw mount. print with abs in high heat situations.
thingiverse
free
3/4" Hose Clip w/ 0° Screw Mount. by mikers
...ose clip w/ 0° screw mount. by mikers
thingiverse
3/4" hose clip w/ 0° screw mount. print with abs in high heat situations.
thingiverse
free
3/4" to 1/2" Hose Clip. by mikers
.../4" to 1/2" hose clip. by mikers
thingiverse
3/4" to 1/2" hose clip. print with abs in high heat situations
thingiverse
free
1/2" to 3/4" Hose Clip. by mikers
.../2" to 3/4" hose clip. by mikers
thingiverse
1/2" to 3/4" hose clip. print with abs in high heat situations
thingiverse
free
Adapter M26x1 to 26.5 (G 3/4) (faucet to garden hose) by Stef_1
...(wasserhahn auf gardena) adapter to attach a gardena (or similar garden hose to a faucet. apapter um einen gardena-gartenschlauch...
thingiverse
free
1/2" to 1-3/4" Hose Clip. by mikers
...uot; to 1-3/4" hose clip. by mikers
thingiverse
1/2" to 1-3/4" hose clip. print with abs in high heat situations
Schlauchwagen
thingiverse
free
Gießstabhalter für Schlauchwagen / Watering lance for hose trolley by MrOctron
...holder can be installed on a hose trolley.
it is designed for the following diameters:
water lance: 15,6 mm
hose trolley: 19,6 mm
3dwarehouse
free
schlauchwagen Feuerwehr
...schlauchwagen feuerwehr
3dwarehouse
schlauchwagen feuerwehr #benz #feuerwehr #mercedes #schlauchwagen
3dwarehouse
free
Hose layer truck/ Schlauchwagen 2000
...scue #sapeurs #sapeurs_pompiers #schlacuhwagen_2000 #schlauchwagen #sw #sw_2000 #sw2000 #truck #unimog #vigili_del_fuoco #ziegler
3dwarehouse
free
logistic fire truck/ GW-L
...#fire_brigade #fire_department #fire_engine #fire_truck #gerätewagen_logistik #gwl #hose_truck #logistic #logistic_truck #schlauchwagen #sw #sw2000_gerätewagen...
Brinkmann
thingiverse
free
Defy clamp by brinkmann
...defy clamp by brinkmann
thingiverse
clamp for motorola defy / defy+
thingiverse
free
Brinkmann GrillMaster Replacement Knob by rebeltaz
...er :)
this is a replacement knob for a brinkmann grillmaster 810-2545-c barbecue grill , although it could possibly other models.
thingiverse
free
Gurkenhalter / Cucumber-holder by brinkmann
... brinkmann
thingiverse
simple holder for a cucumber in the fridge.
einfacher halter für salatgurken in der tür des kühlschranks.
thingiverse
free
Corona-Osterei - Corona easter egg by brinkmann
...corona-osterei - corona easter egg by brinkmann
thingiverse
2-teiliges osterei mit aktuellem design ;-)
thingiverse
free
Clamp for Sony Xperia L by brinkmann
...nkmann
thingiverse
simple clamp to fix the phone somewhere (e.g. dashboard...).a second custom part has to be made for adaption.
thingiverse
free
Golf-Clamp by brinkmann
...f in position without screws or glue. works for golf 6 (2008-2012) and maybe for several other vw-cars like eos etc. (not tested)
thingiverse
free
Sony Xperia X bracket by brinkmann
...imple bracket to hold my sony xperia x. it´s for this phone including a pu-bumper, where the the outer dimension are 145x72x10mm.
thingiverse
free
Cable fixing, cable hook for dashbord by brinkmann
...ables on dashbord e.g chargingcable. cablediameter up to 3mm. uses small gaps to hold. second version with longer and barbed pin.
thingiverse
free
Drain plug / cap for removable HAK trailer coupling / tow hitch by brinkmann
...portmaterial, the "single-part"-file is all you need. otherwise plug_part-1 & 2 must be printed and glued together.
thingiverse
free
Clamp for phone etc Nissan X-Trail XTrail T32 (Rogue) for Ventilation outflow by brinkmann
...t tested.
the pictures show the clamp screwed with a second part for my sony xperia x (https://www.thingiverse.com/thing:2368500)
Schlauchhalter
thingiverse
free
Schlauchhalter Kärcher WD3 by 11880
...schlauchhalter kärcher wd3 by 11880
thingiverse
it´s a tube holder for the kärcher wd3.
thingiverse
free
Schlauchhalter (hose holder) by emmka
...nt diameters are listed in the files. it is easily attached with a cable tie. 2 holes are provided for this.
have fun reprinting.
thingiverse
free
Schlauchhalter, Hose Holder, Cable Holder
...or an air hose or for electrical cable to be mounted at a wall with 2 screws 45x4.5 mm. the distance of the screw holes is 70 mm.
thingiverse
free
Shisha Hookah Schlauchhalter by MBP96
...i bedarf adaptierbar zu machen.
a wall bracket for hookah hoses. two parts to hide the screws and
to make adaptable if necessary.
thingiverse
free
Hose holder for garden faucet | Schlauchhalter by sternmarke
...his hose holder is made to mount on my garden faucet, to avoid further holes in the wall.
the distance between the holes is 70mm.
thingiverse
free
Hookah hose holder / Shisha Schlauchhalter by nbock97
... especially for the dschinni flex hybrid. the inner radius is 19mm like the tube of the hookah. you can adjust it for your needs.
thingiverse
free
Schlauchhalter Makerbot / hose clamp guide tube by berndhoehl
... this problem. he pinched the inner tube so that it no longer pops out and the filament is well managed. (translated with google)
thingiverse
free
Schlauchhalter - holder for flexible compressed air tube or wallbox cable by grommel
... a holder for the airhose that is always idle on the floor... so i quickly designed this part. may also fit for my wallbox cable.
thingiverse
free
Hose Holder 3/8" by MoodyCologne
...hose holder 3/8" by moodycologne thingiverse 3/8" schlauchhalter 3/8" hose holder printed without...
Gardena
3ddd
free
Охлаждаемая витрина Gardena
...ты, сыры, полуфабрикаты мясные и т.д.) gardena. производства winsel. подходит для одиночного, парного и зеркального расположения.
turbosquid
$5
Gardena Gardensprayer Repair Kit
... gardena gardensprayer repair kit for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1421985)
thingiverse
free
Spout for Gardena by bqzero
...na by bqzero
thingiverse
here is a spout that fits on a gardena coupling. just add the standard gardena o-ring and there you go.
thingiverse
free
Halterung Gardena Gießstab by maxlnbg
...halterung gardena gießstab by maxlnbg
thingiverse
halter für gardena gießstab
hose for gardena stick
thingiverse
free
Gardena Gartenkarre - Halter by SlotBear
...gardena gartenkarre - halter by slotbear
thingiverse
gardena gartenkarre
thingiverse
free
Gardena Wall Mount by PaschyS
...gardena wall mount by paschys
thingiverse
gardena wall mount
thingiverse
free
Gardena Quick for S60x6 by Edd77
...gardena quick for s60x6 by edd77
thingiverse
gardena quick for s60x6
thingiverse
free
Sprayer wrench for Gardena by faboaic
...sprayer wrench for gardena by faboaic
thingiverse
wrench for gardena sprayer
thingiverse
free
Gardena pipe peg by lucibrandus
...gardena pipe peg by lucibrandus
thingiverse
gardena pipe peg
thingiverse
free
Gardena sprayer nut by jipo
...gardena sprayer nut by jipo
thingiverse
nut for gardena sprayer
Trolley
archibase_planet
free
Trolley
...trolley
archibase planet
trolley
trolley - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Trolley
...trolley
archibase planet
trolley small cart
cargo trolley - 3d model for interior 3d visualization.
archibase_planet
free
Trolley
...trolley
archibase planet
small cart trolley handcart
trolley f1013 - 3d model for interior 3d visualization.
archibase_planet
free
Trolley
...trolley
archibase planet
trolley cart
trolley n060515 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
archibase_planet
free
Trolley
...trolley
archibase planet
trolley cart small cart
chicago trolley 1 - 3d model for interior 3d visualization.
archibase_planet
free
Trolley
...trolley
archibase planet
trolley cart small cart
chicago trolley 2 - 3d model for interior 3d visualization.
archibase_planet
free
Trolley
...trolley
archibase planet
trolley cart small cart
chicago trolley 3 - 3d model for interior 3d visualization.
archibase_planet
free
Trolley
...trolley
archibase planet
cart trolley small cart
trolley n150411 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Trolley
...trolley
archibase planet
small cart hand-cart trolley
trolley n191110 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
design_connected
$11
Trolley
...trolley
designconnected
ligne roset trolley coffee tables computer generated 3d model. designed by frederic ruyant.
Hose
archibase_planet
free
Hose
...hose
archibase planet
fire-hose fire safety
fire hose cabinet - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$10
hose
...se
turbosquid
royalty free 3d model hose for download as fbx on turbosquid: 3d models for games, architecture, videos. (1479257)
3d_export
$5
Hose bracket
...hose bracket
3dexport
this file consists of hose bracket 3d model used for tensioning of geo trail mesh along with pdf drawing
archive3d
free
Hose 3D Model
...ire-hose fire safety
fire hose cabinet - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
Hose clamp
...hose clamp
3dexport
turbosquid
$30
Japanese Hose
...free 3d model japanese hose for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1633620)
turbosquid
$39
Spray Hose
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$28
Fire hose
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
vacuum hose
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$6
Fire Hoses
...ow polygonal models, easy to animate. - poly count: 1678 - formats: max /obj /fbx/3ds/dxf - high detail was preserved with 204...
Für
turbosquid
free
Brot für die Welt
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
Brillenhalter V3 für 1 Brille für Doppelklebeband by piepsvo
...brillenhalter v3 für 1 brille für doppelklebeband by piepsvo
thingiverse
brillenhalter v3 für 1 brille für doppelklebeband
thingiverse
free
Halterung für 3DConnexion SpaceNavigator für Notebooks by herbert_b1
...ung für 3dconnexion spacenavigator für notebooks by herbert_b1
thingiverse
support for 3dconnexion spacenavigator for notebooks
thingiverse
free
Deckplatte für Playmobil Möbel (Schrank für Herd etc) by charly52
...kplatte für playmobil möbel (schrank für herd etc) by charly52
thingiverse
deckplatte für playmobil möbel (schrank für herd etc)
thingiverse
free
Haken für Kederschiene 7mm für Dtbd-Dachzelt by Paku_ia
...dtbd-dachzelt by paku_ia
thingiverse
haken für ddbd-dachzelt. zur montage wir die haken einfach in die kederleiste eingeschoben.
thingiverse
free
Öse für Kederschiene 7mm für Dtbd-Dachzelt by Paku_ia
...ia
thingiverse
besfestigungsöse für ddbd-dachzelt. zur montage wir die befestigungsöse einefach in die kederleiste eingeschoben.
thingiverse
free
Case für REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER by Rolfiklein
..._full_graphic_smart_controller by rolfiklein
thingiverse
gehäuse für das weit verbreitete grafik display mit schalter für licht.
thingiverse
free
Haken für Dusche by Pascal_1966
...haken für dusche by pascal_1966
thingiverse
haken für dusche
thingiverse
free
Printhalterung für Schaltschrank by nikibalboa
...printhalterung für schaltschrank by nikibalboa
thingiverse
platinenaufnahme für schienenmontage
thingiverse
free
Adapter für Schläuche by jensatweb
...adapter für schläuche by jensatweb
thingiverse
adapter für poolschläuche
Clip
archibase_planet
free
Clip
...clip
archibase planet
paper-clip clip office equipment
clip band - 3d model for interior 3d visualization.
3d_export
$5
screw clip
...screw clip
3dexport
screw clip
3d_ocean
$4
Butterfly clip
... a butterfly clip, it comes with a ready to render set for out of the box rendering. obj version and max alones version included.
turbosquid
$2
clip
...
royalty free 3d model clip for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1358622)
turbosquid
$5
Clip
...lty free 3d model clip for download as c4d, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1521355)
turbosquid
$19
Clip
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Clips
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
clip
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
clips
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Clip
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.