Filament guid with a bracking belt over the spool by nesredef

Last crawled date: 3 years, 4 months ago

After receiving my Snapmaker 2 A250 I saw a need for a guide for the filament. I have looked around the Thingives to find something I could use and at the same time prevented spool jam. I found nothing so here is my suggestion that Works without a fancy Rewind spool attachment .
To make the Belt you need a old Lifebelt or a similar material, length 60 cm in the end make a hole with a diameter off 15 mm. ( best done with a piece of tube warmed up and melted through the material) in the other end bend it around to form a pocket to hold a piece of iron ca.100 g.
The Bracket to guide the filament and keep the belt, is pretty much straight forward to make, I found that I got the best result printing it standing in its work position with the screw holes facing down.