Enclosure for DROK DC 12V Micro Stereo AMP by iamchrismoran

Last crawled date: 3 years, 1 month ago

I bought this amp https://www.amazon.com/gp/product/B010LRBGGS/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 to power some basic speakers in my creativity room and wanted an enclosure for it. It's got a hole for a rocker siwtch for power (specifcially this: https://www.amazon.com/gp/product/B00X40G9EO/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1). My deisgn includes mounts of the sides for dropping into the holes in my elephant rack. If requested (you can see the rack in the pictures), I could upload either the stl with the mounts or the mounts as a separate object that can be placed as needed on the enclosure. The mounts fit perfectly and this suits my need fine.
I originally designed it with pin holes to keep it together, but it's own friction and pressure do the job. The bottom is a little tight and does cause the top part to bend a TINY bit, which doesn't interfere with anything.
There are mounting posts for the holes in the PCB. Originally there were 4, but one always snapped when installing the board, so I removed it. There is still the base for all 4 holes so it holds in place quite well.