Thingiverse
Elecraft BL2 Enclosure by acruxksa
by Thingiverse
Last crawled date: 3 years, 4 months ago
Enclosure for my Elecraft BL2 4:1 / 1:1 Balun
I designed this after building my BL2, so it was made to slide a fully completed BL2 into and then screw the rear cap on. As designed, the rubber feet provided with the kit should stick out a couple mm beyond the bottom of the case.
I used 2.5mm x 8mm cap head screws, but you should be able to use any 2.5mm cap head screw between 6mm and 12mm.
I also had to add 2 4mm washers to each antenna connector screw to space the antenna wire out slightly to clear the case. Your situation may be different, depending on whether you use ring terminals or fork terminals.
I left an enlarged semi-circular opening on the rear of the case to access the 1:1 4:1 switch.
Initially I printed the test/design prints at .30mm resolution and the final print at .2mm resolution. My .30mm prints are perfectly usable, but fitment is a little less precise. Please disregard the layer adhesion issues in some of the pictures, these are from my printer, not the design. ;)
As with all my designs, They were created using OnShape and the models are available to the public if you want to tweak or change anything.
https://cad.onshape.com/documents/4df012d691c01a700dd32944/w/16c58d851a4798b2d4da1879/e/0d99ee51be9fdfafbfd408f6
I designed this after building my BL2, so it was made to slide a fully completed BL2 into and then screw the rear cap on. As designed, the rubber feet provided with the kit should stick out a couple mm beyond the bottom of the case.
I used 2.5mm x 8mm cap head screws, but you should be able to use any 2.5mm cap head screw between 6mm and 12mm.
I also had to add 2 4mm washers to each antenna connector screw to space the antenna wire out slightly to clear the case. Your situation may be different, depending on whether you use ring terminals or fork terminals.
I left an enlarged semi-circular opening on the rear of the case to access the 1:1 4:1 switch.
Initially I printed the test/design prints at .30mm resolution and the final print at .2mm resolution. My .30mm prints are perfectly usable, but fitment is a little less precise. Please disregard the layer adhesion issues in some of the pictures, these are from my printer, not the design. ;)
As with all my designs, They were created using OnShape and the models are available to the public if you want to tweak or change anything.
https://cad.onshape.com/documents/4df012d691c01a700dd32944/w/16c58d851a4798b2d4da1879/e/0d99ee51be9fdfafbfd408f6
Similar models
thingiverse
free
Streamdeck Pi Case by jschoen93
...u like this design please consider donating to help fund other innovative designs. paypal jschoen93@gmail.com, or venmo jschoen93
thingiverse
free
Stratux Nano Dual SDR Case by mistertech
...u have your printer extrusion multiplier lower than mine), try 3.0mm screws instead of 2.5mm.
please post your comments and makes
thingiverse
free
Tripod Screw by tarrentaal
...camera to a mount so i designed one with openscad and printed it on my prusa mk3s+. the head of the screw has a diameter of 30mm.
thingiverse
free
BL2 by timogiles
... umik-1.
doing a side by side comparison of the original speaker enclosure vs the printed enclosure the bl2 sounds much better.
thingiverse
free
Mean Well LS-350-12 4020 PSU Enclosure by Robcollie
...k holes in before the side using m4x8 screws (i used cap head), and 4 m4 for the base into t-nuts
should work for both 12 and 24v
thingiverse
free
Supercard Pro Case Rev. 1 by jsternbe
... and the pillar in it should touch a blank part of the board to hold it down since there are no screw holes in the supercard pro.
thingiverse
free
RPi Prusa Printed Solid Enclosure Case by ddivins
...e
m3x16 (or 12/whatever) with nuts to connect case to enclosure
print settings:
.2 layer height
20% infill
no supports
i used pla
thingiverse
free
Tyro129 GPS Mount by bigone5500
...ws. i wanted the mount to not only hold the antenna but look good too. so i decided to have it follow the lines of the top plate.
thingiverse
free
Nema 23 Motor Coupling to 1/2" Acme Screw by araiza444
... print this coupling at 50% infill or greater and you'll be set.
hope you guys can use this to fix or build your project too!
thingiverse
free
RC522 Simple Case by rboleyn
... back screws, and 4x 3mm by 8mm flat head screws for the rear... the front you can use longer 3mm flat heads to attach the board.
Acruxksa
thingiverse
free
AK Resistance Ingress Badge by acruxksa
...sistance ingress badge by acruxksa
thingiverse
alaska resistance ingress badge
*updated the stl to add beveled edges to the top.
thingiverse
free
Noctua 40x10 Fan Shroud for mcHF SDR Radio by acruxksa
...t it as needed..
https://cad.onshape.com/documents/d8914f986ceb472af1daa945/w/ac5c415cf06c86df3b869b27/e/14c2711f73e09c0e49abe68a
Bl2
turbosquid
$100
Bestlite BL2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$13
BL2 Table Lamp
...bl2 table lamp
designconnected
gubi bl2 table lamp computer generated 3d model. designed by dudley best , robert .
3d_export
$16
BestLite BL2 Desk Lamp 3D Model
...mporary bestlite bl2 table light lighting adjustable gooseneck materials
bestlite bl2 desk lamp 3d model 3dmake_ru 33438 3dexport
turbosquid
$5
Gubi Bestlite BL2 Bone table lamp 3D model
...lite bl2 bone table lamp 3d model for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1462631)
3d_export
$14
gubi bl2 table lamp
...ts used: centimeters.<br>lengths: 21<br>depth: 28<br>height: 52<br>scene objects are organized by groups.
sketchfab
$15
Audi R8 Bl2 9
...audi r8 bl2 9
sketchfab
audi r8 bl2 9 (only outer part ) - audi r8 bl2 9 - buy royalty free 3d model by danicaps
3dfindit
free
BL2 10-40 Blocklift
...bl2 10-40 blocklift
3dfind.it
catalog: camloc
3dfindit
free
BL2 8-28 Blocklift
...bl2 8-28 blocklift
3dfind.it
catalog: camloc
3dfindit
free
BL2 10-28 Blocklift
...bl2 10-28 blocklift
3dfind.it
catalog: camloc
3dfindit
free
BL2 10-22 Blocklift
...bl2 10-22 blocklift
3dfind.it
catalog: camloc
Elecraft
thingiverse
free
replacement knob, Elecraft KX3 by pgenera
...replacement knob, elecraft kx3 by pgenera
thingiverse
a replacement for the small knobs on an elecraft kx3.
thingiverse
free
Elecraft XG50 Case by Ozy
...thingiverse
simple case to hold the elecraft xg50. 2mm walls. no lid. delete my call sign on the back and swap it with yours!
thingiverse
free
elecraft kx3 stand by ke0ath
...elecraft kx3 stand by ke0ath
thingiverse
stand
thingiverse
free
Elecraft KX3 KXPD3 CW paddle leg mount by PG8M
...elecraft kx3 kxpd3 cw paddle leg mount by pg8m
thingiverse
leg mount for the kxpd3 paddle from elecraft.
thingiverse
free
Elecraft KX3 Radio Stand by HungryHam
.... the stand can be used for other devices like ht radios. you will need to duplicate the number of parts needed for each project.
thingiverse
free
Elecraft KX3 and PX3 Stand by HungryHam
...ack.
my qrp club the north georgia qrp club offers a very nice wooden stand. http://www.nogaqrp.org/projects/nogastand/index.html
thingiverse
free
Elecraft KX3 and PX3 Stand by HungryHam
...ack.
my qrp club the north georgia qrp club offers a very nice wooden stand. http://www.nogaqrp.org/projects/nogastand/index.html
thingiverse
free
Rectangular plug for Elecraft KX2 by supercazzola
...e other side has none, so that it doesn't interfere when installed. it will make sense when you look in the rectangular hole.
thingiverse
free
Elecraft KX2 tunning knob V5 by sp7q
...elecraft kx2 tunning knob v5 by sp7q
thingiverse
next version of my knob. this time finger spot is closer to axis.
thingiverse
free
ELECRAFT KX3 Wonder Wand Stand
...verse
just a small holder for the wonder wand aerial to take the strain of the bnc and also to stop
the aerial from falling over
Enclosure
3d_export
free
electrical enclosure
...l enclosure where electrical devices like (relays, contactors, busbars ) are kept in order to protect from hazardous environment.
turbosquid
$100
GPU Enclosure
...yalty free 3d model gpu enclosure for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1381061)
3d_export
$5
Electrical Enclosure
...ed. also has tower lights attaced on the top.<br>file format that are available:<br>.step<br>.obj<br>.stl
archive3d
free
Enclosure 3D Model
...closure 3d model
archive3d
shower enclosure-acquarius- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-omega- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-vega - 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-zenith - 3d model for interior 3d visualization.
turbosquid
$20
shower enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
Dumpster Enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
3d printer enclosure
... model 3d printer enclosure for download as ipt, skp, and fbx on turbosquid: 3d models for games, architecture, videos. (1634310)