Eachine Wizard X220 GPS Housing by broodforce

Last crawled date: 3 years, 1 month ago

Add GPS to Eachine Wizards X220 and protect with this cap.
GPS Module Used: UBlox PAM-7Q
Have a look at the images on the following site, it shows how the GPS is connected to Uart 2. http://www.readytoflyquads.com/sp-racing-f3-flight-controller-acro
Also have a look at the following site for Betaflight configuration:https://github.com/martinbudden/betaflight/blob/master/docs/Gps.md
It makes more sense to replace betaflight with iNav ( https://github.com/iNavFlight/inav/wiki ) on your flight controller if you want to use GPS features.
You can solder the GPS wires to the board or buy similar to https://www.banggood.com/Wire-Cable-Set-For-MiniAPM-V3_1-Flight-Controller-p-941829.html
Verify the required voltage for your GPS, mine was 3V3 so had to source the voltage elsewhere on the board.