Dual Bore Loc Line 3-4in by alex79

Last crawled date: 3 years, 1 month ago

A unquie version of the popular Loc Line with an additional annular path. The goal was to be able to convay two fluids seperatly. Another goal was separate cables from fluid that can both be run down the same path. The outer shell then forms an exoskeleton which will protect and support the contents.
Male and Femail ends are included but both are blank ready to accept a customised end. The outer diameter of the connection is 24mm and the through bore is 8mm. Each section is 24mm between rotating centers and ment to have 22.5deg of freedom. This may be diffrent on other printers and some final sanding may be needed.
Happy Printing!
p.s. If there is a lot of interest or suggestions I may make other sizes or components available but my time is very limited.