Chromecast Remote Controller Battery Cover by LiveFromNewYawk

Last crawled date: 2 years, 11 months ago

Modeled this for someone who lost their remote backer. It's 98% as close as the stock one.
Its difficult to print the small tabs closest to the middle of the remote, so better results might be achieved through a smaller nozzle or a resin print.
I did this with a .4nozzle and Cura using super settings and a raft with tree supports. Took about 3 hours and 11grams of filament.
If you have the stock back panel, I suggest using it still. Google designed it better than I did. This is purely for people who have lost it completely and have no other option.
If you're looking to color code your remotes for specific rooms, I suggest printing a skin for the remote, or just putting some scotch tape on the back with the room written on it. The simplest answer is often the best.
Enjoy!