Thingiverse
Arduino temperature Logger with SD card by SRCDcenter
by Thingiverse
Last crawled date: 3 years, 1 month ago
German Bellow
Arduino temperature Logger with SD card
We developed this outdoor stable temperature logger ourselves and programmed it in cooperation with Dominikus Pfeiffer. We use this to record the ambient temperature for our small weather station in North Berlin, Germany. You can also use it in cold rooms or in the apartment to analyze purposes. Thanks to Windows and Macintosh Excel / Numbers tables you can create wonderful graphics and evaluate the data.
The temperature data stored every 15 minutes on a Micro SD card in a TXT file is evaluated every few months as required. Since we do not have to often to the memory card, we have this safe from moisture in the Inside.
The housing is enclosed with 8x M2 screws and nuts. The power cable can be led outwards through a large hole in the ground. The smaller extinguishers are used for attachment to the site. Furthermore, the current temperature is displayed via a segment display, or the last one has been stored on the SD card. A modern DS18B20 sensor serves as a temperature sensor and stores the values precisely to 0.5 degrees Celsius.
A yellow LED only shows that the device is on the current, so you can see from the distance it works, it flashes every few seconds. The other two LEDs are only visible when writing the data on the SD card and when the time is being requested, because, among other things, a real time clock is installed. Each restart causes a new TXT to be created, consecutively numbered.
In the attached data sets, you will also find the circuit diagram and the Arduino code as well as the enclosure as an STL file. All parts can be bought on the Internet on eBay. Below is a rough listing of the parts required.
1x USB Cable
1x RealTime Clock
1x micro SD card memory module
1x USB Nano V3.0 ATmega328P computer
1x 7-Segemnt LED display
1x DS18B20 1-wire Sensor
3x 5mm Standard LED's (Red, Green, Yellow)
8x M2 Screws and nuts (10mm length)
Various thin power cables
The device work for a few weeks perfectly with us! However, the code still lacks the calibration, which is between outside temperature and housing inside temperature is a difference of 6.5 degrees Celsius. This program adjustment will be available soon.
Arduino Temperatur Logger mit SD Karte
Diesen Outdoor beständigen Temperatur Logger haben wir selbst entwickelt und in Kooperation mit Dominikus Pfeiffer Programmiert. Wir nutzen diesen zur Aufzeichnung der Umgebungstemperatur für unsere kleine Wetterstation in Nord Berlin, Germany. Man kann ihn aber auch in Kühlräumen einsetzen oder in der Wohnung zu Analyse zwecken. Dank Windows und Macintosh Excel / Numbers Tabellen kann man wunderbare Grafiken erstellen und die Daten auswerten.
Die Temperaturdaten, die alle 15 Minuten auf eine Micro SD Karte in einer TXT Datei gespeichert werden, werten wir alle paar Monate nach bedarf aus. Da wir nicht so oft an die Speicherkarte müssen, haben wir diese sicher vor Feuchtigkeit im Inneren verbaut.
Geschlossen ist das Gehäuse mit 8x M2 Schrauben und Muttern. Über ein großes Loch im Boden kann das Stromkabel nach außen geführt werden. Die kleineren Löscher dienen zur Befestigung am Standort. Ferner wird über eine Segment Anzeige die aktuelle Temperatur angezeigt, beziehungsweise die als letztes auf der SD Karte gespeichert wurde. Als Temperatursensor dient ein moderner DS18B20 Sensor und speichert die Werte auf 0,5 Grad Celsius genau.
Eine Gelbe LED zeigt lediglich an das dass gerät am Strom ist, so das man auch aus der Entfernung sehen kann das es Funktioniert, sie blinkt alle paar Sekunden. Die beiden anderen LEDs blicken nur während des Schreibens der Daten auf der SD Karte und wenn die Uhrzeit abgefragt wird, da unter anderem eine Real Time Clock verbaut ist. Jeder Neustart bewirkt das eine neue TXT erstellt wird, fortlaufend nummeriert.
In den angehängten Datensätzen, finden sie auch den Schaltplan und den Arduino Code sowie das Gehäuse als STL File. Alle teile können im Internet bei eBay gekauft werden. Nachfolgend eine grobe Auflistung der benötigten teile.
1x USB Kabel
1x RealTime Clock
1x micro SD Card Memory Modul
1x USB Nano V3.0 ATmega328P Computer
1x 7-Segemnt LED Display
1x DS18B20 1-wire Sensor
3x 5mm Standard LED's (Rot, Grün, Gelb)
8x M2 Schrauben und Muttern (10mm Länge)
Diverse dünne Stromkabel
Das Gerät Arbeit seit einigen Wochen perfekt bei uns! Jedoch fehlt im Code noch die Kalibrierung, den zwischen Außentemperatur und Gehäuse Innentemperatur ist ein Unterschied von 6,5 Grad Celsius. Diese Programmanpassung reichen wir demnächst noch nach.
Arduino temperature Logger with SD card
We developed this outdoor stable temperature logger ourselves and programmed it in cooperation with Dominikus Pfeiffer. We use this to record the ambient temperature for our small weather station in North Berlin, Germany. You can also use it in cold rooms or in the apartment to analyze purposes. Thanks to Windows and Macintosh Excel / Numbers tables you can create wonderful graphics and evaluate the data.
The temperature data stored every 15 minutes on a Micro SD card in a TXT file is evaluated every few months as required. Since we do not have to often to the memory card, we have this safe from moisture in the Inside.
The housing is enclosed with 8x M2 screws and nuts. The power cable can be led outwards through a large hole in the ground. The smaller extinguishers are used for attachment to the site. Furthermore, the current temperature is displayed via a segment display, or the last one has been stored on the SD card. A modern DS18B20 sensor serves as a temperature sensor and stores the values precisely to 0.5 degrees Celsius.
A yellow LED only shows that the device is on the current, so you can see from the distance it works, it flashes every few seconds. The other two LEDs are only visible when writing the data on the SD card and when the time is being requested, because, among other things, a real time clock is installed. Each restart causes a new TXT to be created, consecutively numbered.
In the attached data sets, you will also find the circuit diagram and the Arduino code as well as the enclosure as an STL file. All parts can be bought on the Internet on eBay. Below is a rough listing of the parts required.
1x USB Cable
1x RealTime Clock
1x micro SD card memory module
1x USB Nano V3.0 ATmega328P computer
1x 7-Segemnt LED display
1x DS18B20 1-wire Sensor
3x 5mm Standard LED's (Red, Green, Yellow)
8x M2 Screws and nuts (10mm length)
Various thin power cables
The device work for a few weeks perfectly with us! However, the code still lacks the calibration, which is between outside temperature and housing inside temperature is a difference of 6.5 degrees Celsius. This program adjustment will be available soon.
Arduino Temperatur Logger mit SD Karte
Diesen Outdoor beständigen Temperatur Logger haben wir selbst entwickelt und in Kooperation mit Dominikus Pfeiffer Programmiert. Wir nutzen diesen zur Aufzeichnung der Umgebungstemperatur für unsere kleine Wetterstation in Nord Berlin, Germany. Man kann ihn aber auch in Kühlräumen einsetzen oder in der Wohnung zu Analyse zwecken. Dank Windows und Macintosh Excel / Numbers Tabellen kann man wunderbare Grafiken erstellen und die Daten auswerten.
Die Temperaturdaten, die alle 15 Minuten auf eine Micro SD Karte in einer TXT Datei gespeichert werden, werten wir alle paar Monate nach bedarf aus. Da wir nicht so oft an die Speicherkarte müssen, haben wir diese sicher vor Feuchtigkeit im Inneren verbaut.
Geschlossen ist das Gehäuse mit 8x M2 Schrauben und Muttern. Über ein großes Loch im Boden kann das Stromkabel nach außen geführt werden. Die kleineren Löscher dienen zur Befestigung am Standort. Ferner wird über eine Segment Anzeige die aktuelle Temperatur angezeigt, beziehungsweise die als letztes auf der SD Karte gespeichert wurde. Als Temperatursensor dient ein moderner DS18B20 Sensor und speichert die Werte auf 0,5 Grad Celsius genau.
Eine Gelbe LED zeigt lediglich an das dass gerät am Strom ist, so das man auch aus der Entfernung sehen kann das es Funktioniert, sie blinkt alle paar Sekunden. Die beiden anderen LEDs blicken nur während des Schreibens der Daten auf der SD Karte und wenn die Uhrzeit abgefragt wird, da unter anderem eine Real Time Clock verbaut ist. Jeder Neustart bewirkt das eine neue TXT erstellt wird, fortlaufend nummeriert.
In den angehängten Datensätzen, finden sie auch den Schaltplan und den Arduino Code sowie das Gehäuse als STL File. Alle teile können im Internet bei eBay gekauft werden. Nachfolgend eine grobe Auflistung der benötigten teile.
1x USB Kabel
1x RealTime Clock
1x micro SD Card Memory Modul
1x USB Nano V3.0 ATmega328P Computer
1x 7-Segemnt LED Display
1x DS18B20 1-wire Sensor
3x 5mm Standard LED's (Rot, Grün, Gelb)
8x M2 Schrauben und Muttern (10mm Länge)
Diverse dünne Stromkabel
Das Gerät Arbeit seit einigen Wochen perfekt bei uns! Jedoch fehlt im Code noch die Kalibrierung, den zwischen Außentemperatur und Gehäuse Innentemperatur ist ein Unterschied von 6,5 Grad Celsius. Diese Programmanpassung reichen wir demnächst noch nach.
Similar models
thingiverse
free
CO2-Ampel | CarbonDioxide-Detector by grumpy_scrambler
...8266 angebracht.
alle details und pläne->https://www.umwelt-campus.de/forschung/projekte/iot-werkstatt/ideen-zur-corona-krise
3dwarehouse
free
Tic tac toe Gehäuse für den Arduino
... www.kreativekiste.de und dann auf bastelideen und dann auf spiele. #arduino #elektronik #gehäuse #oberfräße #spiele #tic_tac_toe
thingiverse
free
LGB 2095 Mega 102mm Lautsprecher Gehäuse by Foxm66
...auben der gewichte verschraubt werden.
ansonsten 4 andere schraublöcher nutzen.
das gehäuse ist nur in einer richtung montierbar!
thingiverse
free
siku adapter by AMCR
...r den druck sollte der adapter um 90 grad gedreht werden damit die stützstruktur unter
sich unter den haltern für den frontlader.
thingiverse
free
Feinstaubsensor Gehäuse by MS_Engineering
...5 (für deckel)
1x schraube ca. 3mm x 6mm (für temperatursensor)
2-4cm klett-band (weiche seite) (optional)(für kabeldurchführung)
thingiverse
free
BTT Filament Sensor holder Anycubic by Arne1996
...ann es sein das die feder sich nicht vollständig ausdehnen kann und somit die der druck auf das filament nicht gewährleistet ist.
thingiverse
free
MH-Z19C Top Gehäuse/case für ESP32- und ESP8266-Boards, Raspberry Pi Zero, Raspberry Pi pico, ESP32-CAM, diverse Sensoren und Displays by Funzel
...den man alle "bases" mit drei m3 schrauben fixieren kann. die länge ist aktuell auf das "top-high" ausgelegt.
3dwarehouse
free
Computer Tisch
...se platte ist mit einem french clint system bestückt, damit ich ein paar sachen (kopfhörer, handy, und ähnliches) verstauen kann.
thingiverse
free
Oberwagenlaterne by stephanbrunker
... brücke über der öffnung halbwegs sauber gedruckt wird. die druckteile wurden danach abgeschliffen und mit acteon dampfbehandelt.
thingiverse
free
Blinker Dynamisch by Gsedv
...tinen.
wer jedoch eine fertige platine haben möchte ,kann mir gerne eine nachricht schreiben.
und nun viel spass beim nachbauen!!
Srcdcenter
thingiverse
free
Large Proxxon toolholder by SRCDcenter
...standard proxxon werkzeuge (3 mm schaft). insgesamt können also 77 werkzeuge untergebracht werden. größe: 12 cm x 7,5 cm x 1,5 cm
thingiverse
free
Arduino V3.0 (Nano) ATmega328P holder by SRCDcenter
...as der arduino einen kurzschluss erhält, zu dem lässt sich die halterung mit vier schrauben an andere bauteil gruppen befestigen.
thingiverse
free
Simple cross-flow fan for industrial refrigerator by SRCDcenter
...orfener querstromlüfter. an ihn kann man lüfter von der größe 60 x 60 mm montieren, wie zum beispiel den sunon maglev ma2062-hvl.
thingiverse
free
Wall Bracket for Parrot Bebop Drone Propeller Key by SRCDcenter
...en parrot bebop drone propeller schlüssel von user @marcaber
https://www.thingiverse.com/thing:2009972
passend für bebop 1 und 2
thingiverse
free
Drone Christmas Ornament by SRCDcenter
...//www.thingiverse.com/thing:192624
wir wünschen euch frohe weihnachten und paar besinnliche tage.
euer drohnenshop-berlin.de team
thingiverse
free
Drones easter egg decoration by SRCDcenter
...original ist das ornament circa 3,4 x 5,3 x 0,4 cm groß.
wir wünschen euch eine schöne osterzeit.
euer drohnenshop-berlin.de team
thingiverse
free
Proxxon Grinding Wheel Holder for TG 125/E by SRCDcenter
...chlagwinkel des proxxon tellerschleifers tg 125/e. oben in der mitte befindet sich ein montageloch für eine 6x30 mm wandschraube.
thingiverse
free
DENON DN-MC6000 Headphone Holder by SRCDcenter
...fhörer mit einer bügelbreite von bis zu 4 centimetern aufgehangen werden. gerundete ecken sorgen zu dem für ein optisches design.
thingiverse
free
Two-colored tent nail, Luminous at night by SRCDcenter
...n beide teile zusammen gesteckt und mit einer etwa 25cm langen gewindestange m3 verschraubt. der würfel ist 25 x 25 mm x 25 groß.
thingiverse
free
WeSaCom APT-06 Receiver holder by SRCDcenter
...ger-halterung
mehr über unser wetter projekt in kombination mit drohnen, finden sie unter http://www.berlinerardrone.de/tag/noaa/
Logger
3d_export
$12
Axe 3D Model
...cut razor blade battle ready gameready game wood log logger axe 3d model martialartist 22757...
3d_export
$16
Battle Axe 3D Model
...knife cut razor blade ready gameready game wood log logger battle axe 3d model martialartist 22755...
3d_export
$15
Axe 3D Model
...axe 3d model 3dexport axe ax tool logger woodcutter lumberjack fell forestry hatchet work cut wood medieval...
3d_export
$13
Tonic Axe 3D Model
...knife cut razor blade ready gameready game wood log logger tonic axe 3d model martialartist 22640...
3d_export
$8
Wooden Staff 3D Model
...wizard sorcerer sorceress battle ready gameready game wood log logger wooden staff 3d model martialartist 22753...
3d_export
$19
Kranic Axe 3D Model
...cut razor blade battle ready gameready game wood log logger kranic axe 3d model martialartist 22750...
3d_export
$18
Quad Axe 3D Model
...cut razor blade battle ready gameready game wood log logger quad axe 3d model martialartist 22754...
3d_export
$14
Double Axe 3D Model
...cut razor blade battle ready gameready game wood log logger double axe 3d model martialartist 22756...
cg_studio
$13
Tonic Axe3d model
...knife cut razor blade ready gameready game wood log logger .max - tonic axe 3d model, royalty free license...
cg_studio
$16
Battle Axe3d model
...knife cut razor blade ready gameready game wood log logger king queen knight vassal .max - battle axe 3d...
Sd
3d_ocean
$4
SD-Card
...sd-card
3docean
camera memory mmc mp3 player ram rom sd card
a sd-card
3ddd
$1
Ravak SDS Evolution
...ravak sds evolution
3ddd
sds , ravak
sds
3d_export
$5
SD Card
...sd card
3dexport
photorealistic sd memory card model. cycles engine. blender 3d v.2.82
3d_export
$10
customizable sd port
...customizable sd port
3dexport
customizable sd port
turbosquid
$1
sd card
...rbosquid
royalty free 3d model sd card for download as sldpr on turbosquid: 3d models for games, architecture, videos. (1198502)
turbosquid
$15
SD-DU107P81P1M.rfa
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
SD-DU147P81P1M.rfa
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
SD-DU127P81P1M.rfa
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
SD-DU117P81P1M.rfa
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
SD-DU187P81P1M.rfa
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Temperature
3d_ocean
$9
Temperature Controlled Shaker
...ure
multitherm temperature controlled shaker model. centered, no quads. ready for texturing and animations. rendered in keyshot 4
turbosquid
$35
Ear Temperature Thermometer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$18
Convectors Ntherm and temperature controller Vartronic
...rature controller vartronic for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1553379)
turbosquid
$12
Dryer high temperature mechanical and electrical factory
...rature mechanical and electrical factory for download as max on turbosquid: 3d models for games, architecture, videos. (1615409)
3d_export
$12
Temperature Control Travel Mug
...; x 2.84" x 7.62"<br>- model parts: 2<br>- material count: 2<br>- xform: yes<br>- boxtrick: yes
3d_export
$7
GEARBOX BUSHING PEUGEOT 307
...bushing peugeot 307 3dexport print material - elastan\tpu nozzle temperature - 230°с bed temperature - 100°с layer height -...
3ddd
$1
Wash Basin with light indicator
...indicator 3ddd wash basin with light indicator according to temperature ...
3d_ocean
$6
Low Profile Radiator
...low profile radiator 3docean heat heater hot pipe radiator temperature thermostat warm a low profile version of the...
3d_ocean
$6
Radiator
...radiator 3docean copper heat home house joints pipe radiator temperature thermostat warm a normal radiator with pipes and...
archibase_planet
free
Thermometer
...thermometer archibase planet thermometer temperature gauge sauna equipment thermometer - 3d model (*.gsm+*.3ds) for...
Arduino
turbosquid
$7
Arduino
...turbosquid
royalty free 3d model arduino for download as max on turbosquid: 3d models for games, architecture, videos. (1197165)
turbosquid
$3
Arduino
...turbosquid
royalty free 3d model arduino for download as c4d on turbosquid: 3d models for games, architecture, videos. (1305484)
3d_export
$5
arduino satellite
...rt
this model is the exact arduino based satellite model with some basic sensors and camera modules and also includes batteries.
turbosquid
$1
Arduino UNO
...alty free 3d model arduino uno for download as , stl, and wrl on turbosquid: 3d models for games, architecture, videos. (1515932)
3d_export
$5
esp8266 box arduino
...esp8266 box arduino
3dexport
box for esp8266 module with wire hole. inside dimensions: 49x26 mm. height 15 mm.
3d_export
$60
Arduino Uno Rev3 Microcontroller 3D Model
...mega328p circuit board spark cable wire 5v 74v 9v 111v
arduino uno rev3 microcontroller 3d model danielgarnier4403 97237 3dexport
3d_export
free
arduino rover kit
...no!!! materials: no!!! rigged: no animated: no uv mapped: no it is not an exact copy of the original! not subject to 3d printing!
3d_ocean
$7
The housing for the 3d Printer
...the housing for the 3d printer 3docean arduino device housing stl the housing consists of two portions:...
3d_export
$5
arm 4 axis
...uno -4 servo motor 180° -3 joystick (x,y) for arduino -mdf wood -some wires -cnc laser cut...
3d_export
$5
solar tracker
...machine for the frame . list of material : -arduino uno -2 step motor with driver -4 ldr sensor...
Card
3d_export
$5
card
...card
3dexport
low poly style card
3d_ocean
$3
Dice+Cards
...dice+cards
3docean
dice+cards
3d_ocean
$2
Credit Card
...d is just like a real credit or debit card. there is a material applied that creates the look of a hologram. the file works in...
3d_export
$1
cards
...cards
3dexport
3d_ocean
$4
SD-Card
...sd-card
3docean
camera memory mmc mp3 player ram rom sd card
a sd-card
turbosquid
$1
Cards
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$5
Business Card Box
...business card box
3docean
business card card interior office
business card and box, include psd card design
3d_export
$5
bluetooth card
...bluetooth card
3dexport
this is a simplified bluetooth card with which you can create cases
archive3d
free
Cards 3D Model
...ive3d
playing cards cards
cards n290612 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
SD Card
...sd card
3dexport
photorealistic sd memory card model. cycles engine. blender 3d v.2.82