Adjustable cam holder for Artillery Sidewinder X by Tommyr84

Last crawled date: 3 years, 4 months ago

Cam holder designed for Artillery Sidewinder X1, but it can be used on any printer with some modifications. The Camera Clip holder is designed for an endoscope camera, but an additional file is included to costumize it for your needs
All parts needed are printable, no additional screws, nuts etc. are needed. threads are metric, thread pitch 2.1 if you want to design your own adapter :)
Files needed to be printed:
1x Camera Clip (for endoscope Camera) or 1x Camera Clip custom (needs additional construction in CAD)
4x screws, if you use the gcode, it is allready including 2 screws to be printed simultanously.
3x Arm (print as many as you want/need)
1x Clip profile ( this clip snaps into the Sidewinder X bottom profile, no screws needed)
if you are using a Sidewinder X to print, you can use the included g-code files, please make sure to level your bed correctly.
Every part is printed differently, thats why i will list my settings here, if you are using Cura, you can import settings from the provided G-Code files!
Camera Clip:
layer height: 0.1mm
inflill: 20%, gyroid
printing temp: 200
print speed: 60mm/s
wall speed: 35mm/s
Screw:
if you use less infill, it will most likely break after a few turns, if you slice it yourselfe, make the windings look up and make sure the bottom gets printed tight on the bed
layer height: 0.1mm
inflill: 70%, lines
printing temp: 200
print speed: 60mm/s
build plate temp first layer: 85°C
wall speed: 35mm/s
Arm:
make sure one of the long sides points to the front of your printer, i experienced wraping if i placed them with the mounting holes towards the fan outlet.
layer height: 0.1mm
inflill: 30%, gyroid
printing temp: 200
print speed: 60mm/s
wall speed: 30mm/s
Clip profile:
layer height: 0.2mm
inflill: 15%, gyroid
printing temp: 200
print speed: 60mm/s
wall speed: 30mm/s
build plate temp first layer: 85°C
Support: tree support